SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 32 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency and 1.10 V operation for MSI B650 motherboards
This 32 GB kit contains two 16 GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 latency. It is built for desktop PCs using the MSI MAG B650 Tomahawk WiFi motherboard and suits builders who want a straightforward memory upgrade without overclocking.
Each stick is a 1Rx8 non-ECC unbuffered DIMM running at 1.10 V. The plain 288-pin PCB fits standard DDR5 slots and leaves maximum clearance for large CPU coolers, though the lack of a heat spreader means airflow over the chips relies entirely on case ventilation.
At the stock 1.10 V the modules draw typical DDR5 power and run within JEDEC thermal limits. Without a spreader the DRAM temperature follows case airflow, so a well-ventilated chassis keeps noise low; no extra voltage or active cooling is required for rated speed.
| Brand | NEMIX RAM |
|---|---|
| Series | MSI Gaming Motherboard Compatible Series Memory |
| Model | MSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | MSI |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, giving 5600 MT/s throughput on a compatible board.
Each 16 GB stick is a standard 288-pin DDR5 UDIMM without a heat spreader, so it fits any full-size DDR5 DIMM slot with normal CPU-cooler clearance.
Insert both sticks into the motherboard's recommended DDR5 slots (usually A2 and B2), press until the retention clips click, then enable the 5600 MT/s profile in BIOS so the kit runs at its rated speed.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?