Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V 288-pin UDIMM SuperMicro SYS-531AD-I C9Z790-CG memory upgrade

SKU CH-1KPA-FBBB4

A 32 GB DDR5 kit of two 16 GB modules at 5600 MT/s CL46 1.1 V for SuperMicro SYS-531AD-I C9Z790-CG workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit adds capacity for demanding workloads
  • DDR5 5600 speed moves data faster
  • CL46 latency keeps response tight
  • 1 V operation reduces power draw
  • Validated for SuperMicro SYS-531AD-I C9Z790-CG

System-Specific DDR5 Upgrade Kit

This 32 GB kit contains two 16 GB DDR5 modules built for the SuperMicro SYS-531AD-I C9Z790-CG workstation. It targets IT professionals and enthusiasts who need guaranteed compatibility with that platform. The memory runs at DDR5 5600 with CL46 latency and 1.1 V operation.

Thermals Noise and Power

These unbuffered non-ECC UDIMMs operate at the standard DDR5 voltage of 1.10 V without a heat spreader. Power draw scales with the 5600 MT/s data rate and single-rank 1Rx8 organisation. No active cooling is included so airflow across the 288-pin modules is required.

Bundled Kit Contents

The package supplies two matched 16 GB sticks totalling 32 GB in a single kit. No additional software, cables or mounting hardware are provided. Installation follows the motherboard manual and the modules are validated for the named SuperMicro system only.

Priekšrocības

  • 32 GB kit adds capacity for demanding workloads
  • DDR5 5600 speed moves data faster
  • CL46 latency keeps response tight
  • 1 V operation reduces power draw
  • Validated for SuperMicro SYS-531AD-I C9Z790-CG

Specifikācijas

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 288-pin DDR5 UDIMM modules in the SuperMicro SYS-531AD-I C9Z790-CG, and what step is often missed?

Power off and unplug the system, open the chassis, align each 288-pin DDR5 UDIMM with the slot notch, press firmly until both retention clips click, then verify in BIOS that both 16GB modules run at 5600 MT/s CL46 1.10V.

What maintenance or replacement will this 32GB DDR5 kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreader and no moving parts, so only a future capacity upgrade or a verified module failure would prompt replacement.

What limit appears first when the 1Rx8 DDR5 5600 CL46 kit runs sustained workloads?

The CL46 latency at 5600 MT/s and fixed 1.10V voltage set the performance ceiling before thermal or power limits become a factor.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.