Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips, no heat spreader, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.1V 2Rx8 SuperMicro memory upgrade

SKU CH-4SZS-212RZ

A 32 GB DDR5 UDIMM running at 5200 MT/s with CL38 latency and 1.1 V operation, validated for SuperMicro SuperWorkstation systems

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5200 MT/s speed raises data throughput for responsive computing
  • CL38 CAS latency tightens timing for lower access delay
  • 1 V operating voltage reduces power draw per module
  • Validated for SuperMicro SYS-531AD-I and C9Z790-CG workstations

Capacity and platform fit

This NEMIX RAM module provides 32GB of DDR5 memory in a single 288-pin UDIMM. It is validated for SuperMicro desktop workstations such as the SYS-531AD-I and Super C9Z790-CG platforms.

Who it suits and who it does not

Builders expanding a compatible SuperMicro system with non-ECC unbuffered memory will find this kit a direct fit. Buyers who require ECC error correction or registered modules for server boards should look elsewhere.

Sustained-load behaviour

The module operates at 1.10V with CL38 latency and a 2Rx8 rank structure using major OEM chips. All units are stress tested under load to maintain stability during extended workloads.

Priekšrocības

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5200 MT/s speed raises data throughput for responsive computing
  • CL38 CAS latency tightens timing for lower access delay
  • 1 V operating voltage reduces power draw per module
  • Validated for SuperMicro SYS-531AD-I and C9Z790-CG workstations

Specifikācijas

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will my SuperMicro SYS-531AD-I motherboard accept this 288-pin DDR5 UDIMM?

Yes, the module is built to the 288-pin DDR5 UDIMM form factor and is validated for the SuperMicro SYS-531AD-I and Super C9Z790-CG platforms.

Can I add this 32 GB 2Rx8 stick to existing DDR5 memory running at a different speed?

The system will down-clock all modules to the lowest common speed and tightest timings; mixing ranks or speeds is functional but may reduce peak bandwidth.

How do I confirm the module is running at DDR5 5200 with CL38 after installation?

Check the memory speed and CAS latency in the BIOS main screen or run a tool such as CPU-Z to verify 5200 MT/s and CL38 timings.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.