Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green printed circuit board with black memory chips, no heat spreader, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.1V 2Rx8 SuperMicro memory upgrade

SKU CH-4SZS-212RZ

A 32 GB DDR5 UDIMM running at 5200 MT/s with CL38 latency and 1.1 V operation, validated for SuperMicro SuperWorkstation systems

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5200 MT/s speed raises data throughput for responsive computing
  • CL38 CAS latency tightens timing for lower access delay
  • 1 V operating voltage reduces power draw per module
  • Validated for SuperMicro SYS-531AD-I and C9Z790-CG workstations

Capacity and platform fit

This NEMIX RAM module provides 32GB of DDR5 memory in a single 288-pin UDIMM. It is validated for SuperMicro desktop workstations such as the SYS-531AD-I and Super C9Z790-CG platforms.

Who it suits and who it does not

Builders expanding a compatible SuperMicro system with non-ECC unbuffered memory will find this kit a direct fit. Buyers who require ECC error correction or registered modules for server boards should look elsewhere.

Sustained-load behaviour

The module operates at 1.10V with CL38 latency and a 2Rx8 rank structure using major OEM chips. All units are stress tested under load to maintain stability during extended workloads.

Istaknuto

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5200 MT/s speed raises data throughput for responsive computing
  • CL38 CAS latency tightens timing for lower access delay
  • 1 V operating voltage reduces power draw per module
  • Validated for SuperMicro SYS-531AD-I and C9Z790-CG workstations

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will my SuperMicro SYS-531AD-I motherboard accept this 288-pin DDR5 UDIMM?

Yes, the module is built to the 288-pin DDR5 UDIMM form factor and is validated for the SuperMicro SYS-531AD-I and Super C9Z790-CG platforms.

Can I add this 32 GB 2Rx8 stick to existing DDR5 memory running at a different speed?

The system will down-clock all modules to the lowest common speed and tightest timings; mixing ranks or speeds is functional but may reduce peak bandwidth.

How do I confirm the module is running at DDR5 5200 with CL38 after installation?

Check the memory speed and CAS latency in the BIOS main screen or run a tool such as CPU-Z to verify 5200 MT/s and CL38 timings.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.