Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green printed circuit board with black memory chips, no heat spreader, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.1V 2Rx8 SuperMicro memory upgrade

SKU CH-4SZS-212RZ

A 32 GB DDR5 UDIMM running at 5200 MT/s with CL38 latency and 1.1 V operation, validated for SuperMicro SuperWorkstation systems

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5200 MT/s speed raises data throughput for responsive computing
  • CL38 CAS latency tightens timing for lower access delay
  • 1 V operating voltage reduces power draw per module
  • Validated for SuperMicro SYS-531AD-I and C9Z790-CG workstations

Capacity and platform fit

This NEMIX RAM module provides 32GB of DDR5 memory in a single 288-pin UDIMM. It is validated for SuperMicro desktop workstations such as the SYS-531AD-I and Super C9Z790-CG platforms.

Who it suits and who it does not

Builders expanding a compatible SuperMicro system with non-ECC unbuffered memory will find this kit a direct fit. Buyers who require ECC error correction or registered modules for server boards should look elsewhere.

Sustained-load behaviour

The module operates at 1.10V with CL38 latency and a 2Rx8 rank structure using major OEM chips. All units are stress tested under load to maintain stability during extended workloads.

Puncte forte

  • 32 GB capacity expands system memory for demanding workloads
  • DDR5 5200 MT/s speed raises data throughput for responsive computing
  • CL38 CAS latency tightens timing for lower access delay
  • 1 V operating voltage reduces power draw per module
  • Validated for SuperMicro SYS-531AD-I and C9Z790-CG workstations

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will my SuperMicro SYS-531AD-I motherboard accept this 288-pin DDR5 UDIMM?

Yes, the module is built to the 288-pin DDR5 UDIMM form factor and is validated for the SuperMicro SYS-531AD-I and Super C9Z790-CG platforms.

Can I add this 32 GB 2Rx8 stick to existing DDR5 memory running at a different speed?

The system will down-clock all modules to the lowest common speed and tightest timings; mixing ranks or speeds is functional but may reduce peak bandwidth.

How do I confirm the module is running at DDR5 5200 with CL38 after installation?

Check the memory speed and CAS latency in the BIOS main screen or run a tool such as CPU-Z to verify 5200 MT/s and CL38 timings.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.