BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277453BTC
Krājumā
NEMIX RAM
NEMIX RAM 32GB 4x8GB DDR5 4800 CL40 1.1V UDIMM HP Z2 G9 Tower memory upgrade
Four 8 GB DDR5 modules at 4800 MT/s with CL40 latency and 1.1 V operation, configured for HP Z2 G9 Tower workstations
- Capacity32GB (4 x 8GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity expands workstation multitasking headroom
- DDR5 4800 speed accelerates data-intensive workloads
- CL40 latency optimises responsive memory access
- 1 V operation reduces power draw and heat
- 4 x 8 GB kit enables quad-channel bandwidth
32GB DDR5 kit for HP Z2 G9
This 32GB kit contains four 8GB DDR5 modules built for the HP Z2 G9 Tower workstation. Each UDIMM runs at 4800MT/s with CL40 latency at 1.1V. The unbuffered, non-ECC design matches the platform's native memory architecture. Installation uses the standard 288-pin desktop slots.
Suits owners expanding to 32GB.
Builders who want a straightforward capacity increase to 32GB without enabling ECC will find this kit fits directly. Buyers who need error-correcting code memory or registered modules for a different platform cannot use these sticks. The kit also does not serve systems limited to lower speeds or different pin counts.
4800MT/s CL40 at 1.1V decides fit
The decisive specification is the DDR5 4800MT/s rating with CL40 timings at 1.1V. If the workstation requires this exact speed, latency and voltage combination, the kit will operate as intended. A different speed grade, latency value or voltage requirement means the modules are not the correct match.
Priekšrocības
- 32 GB capacity expands workstation multitasking headroom
- DDR5 4800 speed accelerates data-intensive workloads
- CL40 latency optimises responsive memory access
- 1 V operation reduces power draw and heat
- 4 x 8 GB kit enables quad-channel bandwidth
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
My HP Z2 G9 Tower has four DIMM slots — will this 32 GB kit fill all of them?
The kit contains four 8 GB modules, so it occupies every slot in a four-slot board.
My current memory runs at 1.2 V — will the 1.1 V modules work in the same system?
DDR5 defaults to 1.1 V; the platform sets the voltage, so the lower-voltage modules are compatible.
After installing the kit, how can I confirm it is running at 4800 MT/s?
Check the memory speed in BIOS or with a tool such as CPU-Z; it should show 4800 MHz (PC5-38400).
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
