暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR5 4800 CL40 1.1V UDIMM HP Z2 G9 Tower memory upgrade

SKU CH-GJMP-Q5GZK

Four 8 GB DDR5 modules at 4800 MT/s with CL40 latency and 1.1 V operation, configured for HP Z2 G9 Tower workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands workstation multitasking headroom
  • DDR5 4800 speed accelerates data-intensive workloads
  • CL40 latency optimises responsive memory access
  • 1 V operation reduces power draw and heat
  • 4 x 8 GB kit enables quad-channel bandwidth

32GB DDR5 kit for HP Z2 G9

This 32GB kit contains four 8GB DDR5 modules built for the HP Z2 G9 Tower workstation. Each UDIMM runs at 4800MT/s with CL40 latency at 1.1V. The unbuffered, non-ECC design matches the platform's native memory architecture. Installation uses the standard 288-pin desktop slots.

Suits owners expanding to 32GB.

Builders who want a straightforward capacity increase to 32GB without enabling ECC will find this kit fits directly. Buyers who need error-correcting code memory or registered modules for a different platform cannot use these sticks. The kit also does not serve systems limited to lower speeds or different pin counts.

4800MT/s CL40 at 1.1V decides fit

The decisive specification is the DDR5 4800MT/s rating with CL40 timings at 1.1V. If the workstation requires this exact speed, latency and voltage combination, the kit will operate as intended. A different speed grade, latency value or voltage requirement means the modules are not the correct match.

特長

  • 32 GB capacity expands workstation multitasking headroom
  • DDR5 4800 speed accelerates data-intensive workloads
  • CL40 latency optimises responsive memory access
  • 1 V operation reduces power draw and heat
  • 4 x 8 GB kit enables quad-channel bandwidth

仕様

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

この商品に関する質問

My HP Z2 G9 Tower has four DIMM slots — will this 32 GB kit fill all of them?

The kit contains four 8 GB modules, so it occupies every slot in a four-slot board.

My current memory runs at 1.2 V — will the 1.1 V modules work in the same system?

DDR5 defaults to 1.1 V; the platform sets the voltage, so the lower-voltage modules are compatible.

After installing the kit, how can I confirm it is running at 4800 MT/s?

Check the memory speed in BIOS or with a tool such as CPU-Z; it should show 4800 MHz (PC5-38400).

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。