Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz CL46 2Rx8 1.1V ECC Registered RDIMM Supermicro H14SSF memory upgrade

SKU CH-HY6B-W04S2

A 32 GB DDR5-5600 registered ECC RDIMM built to the exact rank, voltage and timing the Supermicro H14SSF motherboard expects

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Full-rated speed on Supermicro H14SSF with 5600MHz DDR5 RDIMM
  • ECC corrects single-bit errors to prevent silent data corruption
  • Registered design keeps every slot stable at full 32GB capacity
  • Exact 1.1V CL46 2Rx8 timing matches board memory controller
  • 288-pin RDIMM form factor fits the required server slot

32GB DDR5-5600 ECC RDIMM for Supermicro H14SSF

This 32GB DDR5 5600MHz registered ECC module is built for the Supermicro H14SSF motherboard. It delivers the exact 2Rx8 rank, 1.1V voltage and CL46 timing the memory controller expects for full-capacity recognition at rated speed.

DDR5 5600 registered ECC population rules

DDR5 5600 registered ECC modules must follow the motherboard's validated population order and maximum capacity per slot. Registered buffering allows every slot to run fully populated, while ECC corrects single-bit errors to prevent silent data corruption and unplanned reboots.

Upgrade from lower-capacity DDR5 RDIMMs

This module replaces smaller DDR5 RDIMMs when workloads demand 32GB per slot at the board's native 5600MHz speed. The jump is worth it when registered ECC stability and maximum supported density are required for production server deployment.

Priekšrocības

  • Full-rated speed on Supermicro H14SSF with 5600MHz DDR5 RDIMM
  • ECC corrects single-bit errors to prevent silent data corruption
  • Registered design keeps every slot stable at full 32GB capacity
  • Exact 1.1V CL46 2Rx8 timing matches board memory controller
  • 288-pin RDIMM form factor fits the required server slot

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Should I choose the 32GB DDR5-5600 CL46 2Rx8 RDIMM or a different capacity for my Supermicro H14SSF?

This module is a 32GB DDR5-5600 CL46 2Rx8 Registered ECC RDIMM at 1.1V. Check your motherboard manual for supported capacities and approved population order before purchasing.

What does the 5600MHz speed mean once installed in the Supermicro H14SSF?

The module runs at DDR5-5600 (PC5-44800) with CL46 latency when the board's memory controller recognises the exact rank, voltage and timing. Full speed requires correct population per the manual.

How does the 288-pin DDR5 RDIMM interface limit performance in this server?

The 288-pin Registered DDR5 form factor is required by the H14SSF. Registered architecture offloads the memory controller so every slot can run fully populated at the rated 5600MHz speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.