Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green bare circuit board DDR5 RDIMM memory module 288-pin

NEMIX RAM

NEMIX RAM 32GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM X14SDW-36C-SP9F memory upgrade

SKU CH-0XN7-G7ZRK

32 GB DDR5 6400 CL52 2Rx4 1.1 V ECC registered RDIMM validated for the Supermicro X14SDW-36C-SP9F motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32 GB capacity runs at DDR5 6400 speed for high-throughput server workloads
  • CL52 CAS latency and 1.1 V operation deliver rated performance with low power draw
  • 2Rx4 registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches the Supermicro X14SDW-36C-SP9F motherboard requirements
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Targeted server upgrade

This 32 GB DDR5 module is built for the Supermicro X14SDW-36C-SP9F motherboard. It delivers registered ECC memory that the platform recognises at full capacity and rated speed. System administrators handling virtualisation or database workloads gain the reliability their production environments demand.

DDR5 registered limits

The 288-pin RDIMM form factor and registered architecture let every supported slot run fully populated at 6400 MT/s without overloading the memory controller. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. Population rules and maximum capacities are defined by the motherboard manual, so verified fitment is essential.

Replacing non-ECC or slower RDIMMs

Installing this module upgrades systems that currently run unbuffered non-ECC memory or lower-speed registered DIMMs. The jump is worth it when data integrity and full-slot population at 6400 MT/s are required for stable operation. Builders needing a different form factor or higher per-module capacity should verify board limits before purchasing.

Priekšrocības

  • 32 GB capacity runs at DDR5 6400 speed for high-throughput server workloads
  • CL52 CAS latency and 1.1 V operation deliver rated performance with low power draw
  • 2Rx4 registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches the Supermicro X14SDW-36C-SP9F motherboard requirements
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Should I pick the 32GB DDR5-6400 CL52 2Rx4 ECC RDIMM or a different capacity for my Supermicro X14SDW-36C-SP9F?

This 32GB module matches the exact rank, voltage and timing the X14SDW-36C-SP9F expects; choose it when you need a single registered ECC DIMM that will be recognised at full speed without population conflicts.

What does the 6400 MT/s rating deliver once the DIMM is installed in the server?

The board's memory controller will run the module at DDR5-6400 (PC5-51200) with CL52 latency at 1.1V, giving the full rated bandwidth and error-correcting stability for production workloads.

How does the 288-pin RDIMM interface and registered ECC design affect real-world limits?

The registered buffer lets every slot run fully populated at 6400 MT/s, while on-die ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.