BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00281088BTC
Krājumā
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-5517 JIVA 17 memory upgrade
A 4 GB DDR3 SODIMM module rated at 1333 MHz for POSIFLEX XT-5517 JIVA 17 terminals
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 4 GB capacity upgrades POS terminal responsiveness
- DDR3 1333 MHz speed matches system specification
- 35 V low-voltage operation reduces power draw
- 204-pin SODIMM form factor fits POSIFLEX XT-5517 JIVA 17
- 2Rx8 dual-rank organisation maximises memory bandwidth
POS terminal memory upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX XT-5517 JIVA 17 terminal. It targets system integrators and IT staff who maintain point-of-sale kiosks needing a direct replacement module.
Fits the factory SODIMM slot
The 204-pin unbuffered stick installs like standard laptop memory; open the service panel, align the key, and press until the latches click. A common issue is mixing 1.35 V and 1.50 V modules in the same channel, which can prevent the terminal from posting.
1333 MHz DDR3 speed rating
The module runs at PC3-10600 with CL9 latency, the exact specification the XT-5517 JIVA 17 memory controller expects. Buyers whose terminals require a different DDR generation or a higher data rate cannot use this part.
Priekšrocības
- 4 GB capacity upgrades POS terminal responsiveness
- DDR3 1333 MHz speed matches system specification
- 35 V low-voltage operation reduces power draw
- 204-pin SODIMM form factor fits POSIFLEX XT-5517 JIVA 17
- 2Rx8 dual-rank organisation maximises memory bandwidth
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
How can I confirm the module is running at 1333 MHz after installing it in the POSIFLEX XT-5517 JIVA 17 terminal?
Enter the system BIOS or use a hardware information tool in the OS to verify the memory speed reads 1333 MHz and the voltage shows 1.35 V.
What comes in the package and what extra parts are required for installation?
The box contains one 4 GB 204-pin DDR3 SODIMM. No additional components are needed; the module installs directly into the terminal's memory slot.
Which capacity and voltage version should I choose for the POSIFLEX XT-5517 JIVA 17?
This module is a 4 GB stick rated at 1.35 V DDR3 1333 (PC3-10600), matching the terminal's supported specification.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
