Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 204-pin DDR3 SODIMM module with black chips

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-5517 JIVA 17 memory upgrade

SKU CH-NATD-Y3PVH

A 4 GB DDR3 SODIMM module rated at 1333 MHz for POSIFLEX XT-5517 JIVA 17 terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4 GB capacity upgrades POS terminal responsiveness
  • DDR3 1333 MHz speed matches system specification
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits POSIFLEX XT-5517 JIVA 17
  • 2Rx8 dual-rank organisation maximises memory bandwidth

POS terminal memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX XT-5517 JIVA 17 terminal. It targets system integrators and IT staff who maintain point-of-sale kiosks needing a direct replacement module.

Fits the factory SODIMM slot

The 204-pin unbuffered stick installs like standard laptop memory; open the service panel, align the key, and press until the latches click. A common issue is mixing 1.35 V and 1.50 V modules in the same channel, which can prevent the terminal from posting.

1333 MHz DDR3 speed rating

The module runs at PC3-10600 with CL9 latency, the exact specification the XT-5517 JIVA 17 memory controller expects. Buyers whose terminals require a different DDR generation or a higher data rate cannot use this part.

Helstu kostir

  • 4 GB capacity upgrades POS terminal responsiveness
  • DDR3 1333 MHz speed matches system specification
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits POSIFLEX XT-5517 JIVA 17
  • 2Rx8 dual-rank organisation maximises memory bandwidth

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

How can I confirm the module is running at 1333 MHz after installing it in the POSIFLEX XT-5517 JIVA 17 terminal?

Enter the system BIOS or use a hardware information tool in the OS to verify the memory speed reads 1333 MHz and the voltage shows 1.35 V.

What comes in the package and what extra parts are required for installation?

The box contains one 4 GB 204-pin DDR3 SODIMM. No additional components are needed; the module installs directly into the terminal's memory slot.

Which capacity and voltage version should I choose for the POSIFLEX XT-5517 JIVA 17?

This module is a 4 GB stick rated at 1.35 V DDR3 1333 (PC3-10600), matching the terminal's supported specification.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.