BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278074BTC
Krājumā
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7417Z-I memory upgrade
A 4 GB DDR3 SODIMM module running at 1333 MHz with 1.35 V low voltage for the POSIFLEX KS-7417Z-I terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX KS-7417Z-I terminal compatibility
- 4GB DDR3 1333MHz module boosts system responsiveness
- Low 1.35V operation reduces power consumption
- 204-pin SODIMM form factor fits POS slots
- CL9 latency with major OEM chips ensures stability
POSIFLEX KS-7417Z-I compatible DDR3 SODIMM
This 4 GB DDR3 1333 module is built for the POSIFLEX KS-7417Z-I fanless point-of-sale terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and runs at 1.35 V. The memory is non-ECC and unbuffered for standard system compatibility.
Suits POS terminal upgrades only
It fits technicians who need a direct replacement for the KS-7417Z-I platform. Buyers who require ECC error correction, registered modules, higher capacities or a different pin count should look elsewhere. The voltage and timing are fixed for this specific hardware.
204-pin DDR3 1333 SODIMM at 1.35 V
The 204-pin DDR3 1333 interface with 1.35 V operation is the single specification that decides fitment. If the target system demands a different pin layout, voltage or speed grade, this module will not work. Verify the exact slot specification before ordering.
Priekšrocības
- Designed for POSIFLEX KS-7417Z-I terminal compatibility
- 4GB DDR3 1333MHz module boosts system responsiveness
- Low 1.35V operation reduces power consumption
- 204-pin SODIMM form factor fits POS slots
- CL9 latency with major OEM chips ensures stability
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
Does my POSIFLEX KS-7417Z-I terminal need a free 204-pin SODIMM slot to accept this 4GB DDR3 module?
Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM socket in the POSIFLEX KS-7417Z-I terminal.
Will this 1.35V DDR3 1333 module run stably alongside existing 1.50V DDR3 memory in the same system?
The module operates at 1.35V with a CL9 latency at 1333MHz; the system will typically run all installed DDR3 at the lowest common voltage and speed.
How can I confirm the new memory is recognised at 1333MHz and 4GB capacity after installation?
Check the BIOS memory information or the operating system task manager; both should report 4GB total capacity and a DDR3 1333 (PC3-10600) speed.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
