Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX KS-7417Z-I memory upgrade

SKU CH-7PVS-KBT5G

A 4 GB DDR3 SODIMM module running at 1333 MHz with 1.35 V low voltage for the POSIFLEX KS-7417Z-I terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX KS-7417Z-I terminal compatibility
  • 4GB DDR3 1333MHz module boosts system responsiveness
  • Low 1.35V operation reduces power consumption
  • 204-pin SODIMM form factor fits POS slots
  • CL9 latency with major OEM chips ensures stability

POSIFLEX KS-7417Z-I compatible DDR3 SODIMM

This 4 GB DDR3 1333 module is built for the POSIFLEX KS-7417Z-I fanless point-of-sale terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and runs at 1.35 V. The memory is non-ECC and unbuffered for standard system compatibility.

Suits POS terminal upgrades only

It fits technicians who need a direct replacement for the KS-7417Z-I platform. Buyers who require ECC error correction, registered modules, higher capacities or a different pin count should look elsewhere. The voltage and timing are fixed for this specific hardware.

204-pin DDR3 1333 SODIMM at 1.35 V

The 204-pin DDR3 1333 interface with 1.35 V operation is the single specification that decides fitment. If the target system demands a different pin layout, voltage or speed grade, this module will not work. Verify the exact slot specification before ordering.

Punti di forza

  • Designed for POSIFLEX KS-7417Z-I terminal compatibility
  • 4GB DDR3 1333MHz module boosts system responsiveness
  • Low 1.35V operation reduces power consumption
  • 204-pin SODIMM form factor fits POS slots
  • CL9 latency with major OEM chips ensures stability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Domande su questo articolo

Does my POSIFLEX KS-7417Z-I terminal need a free 204-pin SODIMM slot to accept this 4GB DDR3 module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM socket in the POSIFLEX KS-7417Z-I terminal.

Will this 1.35V DDR3 1333 module run stably alongside existing 1.50V DDR3 memory in the same system?

The module operates at 1.35V with a CL9 latency at 1333MHz; the system will typically run all installed DDR3 at the lowest common voltage and speed.

How can I confirm the new memory is recognised at 1333MHz and 4GB capacity after installation?

Check the BIOS memory information or the operating system task manager; both should report 4GB total capacity and a DDR3 1333 (PC3-10600) speed.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.