SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00498937BTC
Krājumā
NEMIX RAM
NEMIX RAM 512GB 4x128GB DDR5 6400 CL52 1.1V 2Rx4 RDIMM ECC memory upgrade
512 GB server memory kit with four 128 GB DDR5 6400 CL52 1.1 V 2Rx4 registered ECC RDIMMs for the Supermicro H14DSG-O-CPU motherboard
- Capacity512GB (4 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from four 128 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth on compatible platforms
- 10 V operation reduces power draw per module in fully populated systems
- Registered ECC RDIMM design corrects single-bit errors and stabilises heavy memory loads
- Verified fit for Supermicro H14DSG-O-CPU motherboard with 288-pin RDIMM slots
Exact-match capacity and speed
This kit delivers 512GB across four 128GB DDR5 6400 RDIMM modules at CL52 and 1.1V. It is built for the Supermicro H14DSG-O-CPU motherboard and other systems that require Registered ECC memory in this exact configuration. The 2Rx4 rank structure matches the controller expectations for full-capacity recognition.
Registered design and 288-pin fit
Registered buffering reduces electrical load on the memory controller so all four slots can run populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM form factor installs only in compatible server DIMM slots; it will not fit UDIMM or SODIMM sockets.
Upgrade from smaller or slower kits
Replacing a lower-capacity or lower-speed RDIMM set with this kit adds the bandwidth and density needed for heavily threaded workloads. The jump is worthwhile when your current population leaves slots empty or forces a reduced frequency, and the board's qualified-vendor list includes this part number.
Priekšrocības
- 512 GB total capacity from four 128 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth on compatible platforms
- 10 V operation reduces power draw per module in fully populated systems
- Registered ECC RDIMM design corrects single-bit errors and stabilises heavy memory loads
- Verified fit for Supermicro H14DSG-O-CPU motherboard with 288-pin RDIMM slots
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
What speed does the DDR5 6400 interface run at when all four 128GB RDIMMs are populated?
The kit is rated at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V, and the registered architecture keeps every slot running at that speed when fully populated.
Will these 288-pin RDIMMs fit the Supermicro H14DSG-O-CPU motherboard's DIMM slots?
Yes, the 288-pin registered RDIMM form factor matches the board's required slot type and population rules exactly.
How do I install the 4x128GB kit correctly, and which step is most often missed?
Follow the motherboard manual's approved DIMM population order for all four slots; the step most often missed is verifying the exact slot sequence before inserting the modules.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
