SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.0050167BTC
재고 있음
NEMIX RAM
NEMIX RAM 512GB 4x128GB DDR5 6400 CL52 1.1V 2Rx4 RDIMM ECC memory upgrade
512 GB server memory kit with four 128 GB DDR5 6400 CL52 1.1 V 2Rx4 registered ECC RDIMMs for the Supermicro H14DSG-O-CPU motherboard
- Capacity512GB (4 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from four 128 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth on compatible platforms
- 10 V operation reduces power draw per module in fully populated systems
- Registered ECC RDIMM design corrects single-bit errors and stabilises heavy memory loads
- Verified fit for Supermicro H14DSG-O-CPU motherboard with 288-pin RDIMM slots
Exact-match capacity and speed
This kit delivers 512GB across four 128GB DDR5 6400 RDIMM modules at CL52 and 1.1V. It is built for the Supermicro H14DSG-O-CPU motherboard and other systems that require Registered ECC memory in this exact configuration. The 2Rx4 rank structure matches the controller expectations for full-capacity recognition.
Registered design and 288-pin fit
Registered buffering reduces electrical load on the memory controller so all four slots can run populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM form factor installs only in compatible server DIMM slots; it will not fit UDIMM or SODIMM sockets.
Upgrade from smaller or slower kits
Replacing a lower-capacity or lower-speed RDIMM set with this kit adds the bandwidth and density needed for heavily threaded workloads. The jump is worthwhile when your current population leaves slots empty or forces a reduced frequency, and the board's qualified-vendor list includes this part number.
주요 특징
- 512 GB total capacity from four 128 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth on compatible platforms
- 10 V operation reduces power draw per module in fully populated systems
- Registered ECC RDIMM design corrects single-bit errors and stabilises heavy memory loads
- Verified fit for Supermicro H14DSG-O-CPU motherboard with 288-pin RDIMM slots
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
What speed does the DDR5 6400 interface run at when all four 128GB RDIMMs are populated?
The kit is rated at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V, and the registered architecture keeps every slot running at that speed when fully populated.
Will these 288-pin RDIMMs fit the Supermicro H14DSG-O-CPU motherboard's DIMM slots?
Yes, the 288-pin registered RDIMM form factor matches the board's required slot type and population rules exactly.
How do I install the 4x128GB kit correctly, and which step is most often missed?
Follow the motherboard manual's approved DIMM population order for all four slots; the step most often missed is verifying the exact slot sequence before inserting the modules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
