SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00499579BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 1.1V UDIMM memory upgrade
A 64 GB dual-channel DDR5 kit running at 4800 MT/s with CL40 latency and 1.1 V operation for ASRock Z790 and B650 motherboards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64GB total capacity across two 32GB modules for high-density desktop upgrades
- DDR5 4800 speed rated at PC5-38400 for fast data throughput
- CL40 CAS latency at 1.1V standard voltage for efficient operation
- 288-pin UDIMM form factor with 2Rx8 rank organisation for broad motherboard compatibility
- Tested compatible with ASRock Z790 and B650 LiveMixer motherboards
Targeted DDR5 kit for ASRock Z790
This 64 GB kit contains two 32 GB unbuffered UDIMMs rated at DDR5 4800 with CL40 timings. It is built for desktop PCs that use the specified ASRock motherboards and need a straight-forward capacity increase. No heat spreaders are included, keeping the modules low-profile for tight CPU cooler clearances.
Standard 288-pin DDR5 UDIMM form factor
Each module uses a 2Rx8 organisation and runs at the JEDEC 1.10 V baseline, so no manual voltage tuning is required. The plain green PCB fits any desktop slot wired for DDR5, and the dual-rank layout helps fill four-channel controllers efficiently. Installation follows the usual UDIMM procedure described in the motherboard manual.
Two-module kit validated for the listed ASRock
The package delivers exactly the 64 GB (2 x 32 GB) configuration tested for compatibility with the Z790 LiveMixer and B650 LiveMixer broadcasting motherboards. Buyers who need ECC error correction, registered signalling, or speeds above the 4800 MT/s JEDEC base should look for a different module type.
Priekšrocības
- 64GB total capacity across two 32GB modules for high-density desktop upgrades
- DDR5 4800 speed rated at PC5-38400 for fast data throughput
- CL40 CAS latency at 1.1V standard voltage for efficient operation
- 288-pin UDIMM form factor with 2Rx8 rank organisation for broad motherboard compatibility
- Tested compatible with ASRock Z790 and B650 LiveMixer motherboards
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
What DDR5 speed does this 64 GB kit run at, and what does the PC5-38400 rating mean for bandwidth?
The kit is rated DDR5 4800 (PC5-38400), so the standard's peak transfer rate is 38400 MB/s; actual throughput depends on the motherboard's memory controller and BIOS settings.
Will these 288-pin UDIMMs fit in the four DIMM slots on my ASRock Z790 or B650 LiveMixer board?
Yes, each module is a standard 288-pin DDR5 UDIMM and the kit contains two 32 GB sticks, so they install directly into any DDR5 desktop DIMM slot on those motherboards.
Do I need to enable XMP or EXPO in the BIOS to reach the rated CL40 4800 speed, or will it run at that speed automatically?
DDR5 defaults to 4800 MT/s at 1.1 V without any profile; the modules will run at CL40 4800 automatically, though you can still enable an XMP/EXPO profile if your board offers one for tighter timings.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
