BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280732BTC
Krājumā
NEMIX RAM
NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-PIN SODIMM POSIFLEX HS-3510-G2 memory upgrade
An 8 GB DDR3 SODIMM module running at 1333 MHz with CL9 latency for the POSIFLEX HS-3510-G2 all-in-one system
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8 GB capacity lets POS terminals handle larger workloads
- DDR3 1333 speed matches the HS-3510-G2 memory bus
- 35 V low-voltage operation reduces system power draw
- 2Rx8 dual-rank layout maximises memory density per slot
- 204-pin SODIMM form factor fits the all-in-one motherboard directly
System-specific DDR3 SODIMM for POSIFLEX HS-3510-G2
This 8 GB DDR3 1333 module is built to match the POSIFLEX HS-3510-G2 all-in-one point-of-sale system. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and non-ECC unbuffered operation. The part number MS10600-828K1 identifies the exact configuration validated for that platform.
Low-voltage operation at 1.35 V
The memory runs at 1.35 V, below the usual 1.50 V for DDR3 1333, reducing power draw and heat in the compact chassis. CL9 latency and PC3-10600 bandwidth deliver the rated speed without extra voltage. No heat spreader is fitted, relying on the system's internal airflow for cooling.
Single-slot upgrade frees the second SODIMM socket
The 1×8 GB layout occupies one 204-pin slot, leaving any second slot open for future expansion. Installation follows the owner's manual procedure and requires no BIOS changes beyond standard JEDEC detection. The module is tested for stability in the target POSIFLEX platform before shipping.
Priekšrocības
- 8 GB capacity lets POS terminals handle larger workloads
- DDR3 1333 speed matches the HS-3510-G2 memory bus
- 35 V low-voltage operation reduces system power draw
- 2Rx8 dual-rank layout maximises memory density per slot
- 204-pin SODIMM form factor fits the all-in-one motherboard directly
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Jautājumi par šo preci
How do I install the 204-PIN SODIMM in the POSIFLEX HS-3510-G2 and what step is often missed?
Power off the unit, remove the access panel, align the notch on the 204-PIN SODIMM with the slot key, press firmly until the side clips click, then verify the system reports the full 8GB at 1333MHz in BIOS.
What maintenance or replacement will this 8GB DDR3 module need over time?
No scheduled maintenance is required; keep the slot contacts clean and ensure the 1.35V supply remains stable. Replace only if memory diagnostics report errors or the POS workload exceeds the single 8GB capacity.
What limit appears first when this CL9 1333MHz SODIMM runs sustained POS workloads?
The 8GB capacity ceiling is reached before bandwidth or thermal limits, causing the OS to swap to storage and slowing transaction response during peak periods.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
