We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-PIN SODIMM POSIFLEX HS-3510-G2 memory upgrade

SKU CH-2P3J-ZAMR5

An 8 GB DDR3 SODIMM module running at 1333 MHz with CL9 latency for the POSIFLEX HS-3510-G2 all-in-one system

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB capacity lets POS terminals handle larger workloads
  • DDR3 1333 speed matches the HS-3510-G2 memory bus
  • 35 V low-voltage operation reduces system power draw
  • 2Rx8 dual-rank layout maximises memory density per slot
  • 204-pin SODIMM form factor fits the all-in-one motherboard directly

System-specific DDR3 SODIMM for POSIFLEX HS-3510-G2

This 8 GB DDR3 1333 module is built to match the POSIFLEX HS-3510-G2 all-in-one point-of-sale system. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and non-ECC unbuffered operation. The part number MS10600-828K1 identifies the exact configuration validated for that platform.

Low-voltage operation at 1.35 V

The memory runs at 1.35 V, below the usual 1.50 V for DDR3 1333, reducing power draw and heat in the compact chassis. CL9 latency and PC3-10600 bandwidth deliver the rated speed without extra voltage. No heat spreader is fitted, relying on the system's internal airflow for cooling.

Single-slot upgrade frees the second SODIMM socket

The 1×8 GB layout occupies one 204-pin slot, leaving any second slot open for future expansion. Installation follows the owner's manual procedure and requires no BIOS changes beyond standard JEDEC detection. The module is tested for stability in the target POSIFLEX platform before shipping.

Highlights

  • 8 GB capacity lets POS terminals handle larger workloads
  • DDR3 1333 speed matches the HS-3510-G2 memory bus
  • 35 V low-voltage operation reduces system power draw
  • 2Rx8 dual-rank layout maximises memory density per slot
  • 204-pin SODIMM form factor fits the all-in-one motherboard directly

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How do I install the 204-PIN SODIMM in the POSIFLEX HS-3510-G2 and what step is often missed?

Power off the unit, remove the access panel, align the notch on the 204-PIN SODIMM with the slot key, press firmly until the side clips click, then verify the system reports the full 8GB at 1333MHz in BIOS.

What maintenance or replacement will this 8GB DDR3 module need over time?

No scheduled maintenance is required; keep the slot contacts clean and ensure the 1.35V supply remains stable. Replace only if memory diagnostics report errors or the POS workload exceeds the single 8GB capacity.

What limit appears first when this CL9 1333MHz SODIMM runs sustained POS workloads?

The 8GB capacity ceiling is reached before bandwidth or thermal limits, causing the OS to swap to storage and slowing transaction response during peak periods.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.