SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.004997BTC
Krājumā
NEMIX RAM
NEMIX RAM 8GB DDR4 2400 ECC UDIMM CL17 1.2V 2Rx8 288-pin memory upgrade
8 GB DDR4 2400 ECC UDIMM CL17 1.2 V 2Rx8 288-pin module for server and workstation upgrades
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity
- 2400 MHz DDR4 speed supports demanding workloads
- Low 1.20 V voltage reduces power draw
- 2Rx8 dual-rank layout boosts memory throughput
- 288-pin UDIMM fits standard workstation slots
8GB DDR4 ECC UDIMM for workstations
This 8 GB DDR4 2400 module adds ECC protection to compatible workstations and servers. It runs at 1.2 V with a CL17 latency and a 2Rx8 organisation. The unbuffered design fits standard 288-pin DDR4 slots in systems that accept ECC UDIMMs.
Unbuffered 288-pin layout with no heat spreader
The stick uses a bare green PCB so it sits low in tight server chassis or dense workstation boards. Gold-edge contacts on the 288-pin interface ensure reliable seating in vertical or angled DIMM slots. No spreader means clearance is never an issue when CPU coolers overhang the memory banks.
Confirm ECC UDIMM support and 2400 MT/s capability
Check that your motherboard or server platform explicitly lists unbuffered ECC UDIMM support at DDR4 2400. Systems that only accept registered or load-reduced modules will not post with this stick. Verify the maximum supported capacity per slot and total population limits in the vendor documentation before ordering.
Priekšrocības
- ECC protection guards data integrity
- 2400 MHz DDR4 speed supports demanding workloads
- Low 1.20 V voltage reduces power draw
- 2Rx8 dual-rank layout boosts memory throughput
- 288-pin UDIMM fits standard workstation slots
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2666MHZ ECC Unbuffered UDIMM |
| Part Number | ME19200-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 2666MHZ ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN ECC Unbuffered UDIMM |
Jautājumi par šo preci
What DDR4 speed and CAS latency does this ECC UDIMM run at?
This module is rated DDR4 2400 (PC4-19200) with a CL17 latency at 1.2 V.
What physical slot and form factor does the 288-pin UDIMM require?
It fits a standard 288-pin DDR4 UDIMM slot and has no heat spreader, so it clears most CPU coolers.
How is the ECC UDIMM installed and what common step is missed?
Power off, open the case, align the notch with the slot key, press firmly until both retention clips click, then enable ECC in the BIOS.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
