We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR4 ECC UDIMM circuit board with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 ECC UDIMM CL17 1.2V 2Rx8 288-pin memory upgrade

SKU CH-NEPS-37HKC

8 GB DDR4 2400 ECC UDIMM CL17 1.2 V 2Rx8 288-pin module for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity
  • 2400 MHz DDR4 speed supports demanding workloads
  • Low 1.20 V voltage reduces power draw
  • 2Rx8 dual-rank layout boosts memory throughput
  • 288-pin UDIMM fits standard workstation slots

8GB DDR4 ECC UDIMM for workstations

This 8 GB DDR4 2400 module adds ECC protection to compatible workstations and servers. It runs at 1.2 V with a CL17 latency and a 2Rx8 organisation. The unbuffered design fits standard 288-pin DDR4 slots in systems that accept ECC UDIMMs.

Unbuffered 288-pin layout with no heat spreader

The stick uses a bare green PCB so it sits low in tight server chassis or dense workstation boards. Gold-edge contacts on the 288-pin interface ensure reliable seating in vertical or angled DIMM slots. No spreader means clearance is never an issue when CPU coolers overhang the memory banks.

Confirm ECC UDIMM support and 2400 MT/s capability

Check that your motherboard or server platform explicitly lists unbuffered ECC UDIMM support at DDR4 2400. Systems that only accept registered or load-reduced modules will not post with this stick. Verify the maximum supported capacity per slot and total population limits in the vendor documentation before ordering.

Highlights

  • ECC protection guards data integrity
  • 2400 MHz DDR4 speed supports demanding workloads
  • Low 1.20 V voltage reduces power draw
  • 2Rx8 dual-rank layout boosts memory throughput
  • 288-pin UDIMM fits standard workstation slots

Specifications

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2666MHZ ECC Unbuffered UDIMM
Part NumberME19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 2666MHZ ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN ECC Unbuffered UDIMM

Questions about this item

What DDR4 speed and CAS latency does this ECC UDIMM run at?

This module is rated DDR4 2400 (PC4-19200) with a CL17 latency at 1.2 V.

What physical slot and form factor does the 288-pin UDIMM require?

It fits a standard 288-pin DDR4 UDIMM slot and has no heat spreader, so it clears most CPU coolers.

How is the ECC UDIMM installed and what common step is missed?

Power off, open the case, align the notch with the slot key, press firmly until both retention clips click, then enable ECC in the BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.