Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Twelve green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 192GB (12x16GB) CL40 1.1V 1Rx8 Supermicro H14DSG-O-CPU memory upgrade

SKU CH-ZAPQ-PDF4Z

A 192GB kit of twelve 16GB DDR5-4800 ECC registered DIMMs validated for the Supermicro H14DSG-O-CPU motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 12X16GB

Skatīt vēl 30 konfigurācijas
  • 192GB capacity with twelve 16GB modules for maximum server memory density
  • DDR5 4800 speed rated at PC5-38400 for high-throughput workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1V matches the motherboard memory controller specifications
  • Verified compatibility with Supermicro H14DSG-O-CPU using 288-pin RDIMM form factor

Exact-match server upgrade

This 192GB kit contains twelve 16GB DDR5 4800 registered ECC RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. The modules run at 1.10V with CL40 timing and a 1Rx8 organisation that matches the board's memory controller requirements. Each 288-pin DIMM is validated so the full capacity is recognised at rated speed without manual tuning.

Sustained enterprise stability

Registered buffering offloads the memory controller, allowing all twelve slots to stay fully populated at 4800 MT/s under continuous load. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long-running workloads. The 1.1V operating voltage keeps power draw consistent across the full kit.

Dense population without spreaders

The bare-module design fits tight server DIMM spacing where tall heat spreaders would block adjacent slots or airflow. Twelve 288-pin RDIMMs fill every channel the H14DSG-O-CPU supports, maximising capacity per CPU socket. Builders needing fewer modules or consumer UDIMM form factors should look elsewhere.

Priekšrocības

  • 192GB capacity with twelve 16GB modules for maximum server memory density
  • DDR5 4800 speed rated at PC5-38400 for high-throughput workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • CL40 latency at 1.1V matches the motherboard memory controller specifications
  • Verified compatibility with Supermicro H14DSG-O-CPU using 288-pin RDIMM form factor

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much heat does the 1.1V DDR5 4800 kit generate when all twelve 16GB RDIMMs run continuously?

Each module operates at 1.1V with no heat spreader, so airflow across the 288-pin RDIMMs is the primary cooling path; the registered buffer reduces electrical load on the memory controller, helping keep per-DIMM thermals steady under sustained load.

What motherboard and memory population rules must I already have for this 192GB kit to function?

A Supermicro H14DSG-O-CPU motherboard with twelve DDR5 RDIMM slots and a CPU that supports 1Rx8 registered ECC at DDR5 4800; the manual’s population order must allow all twelve slots to be filled simultaneously.

Can I mix these CL40 1Rx8 RDIMMs with older DDR5 ECC modules already installed in the same server?

Mixing ranks, latencies or voltages is not supported; the board expects identical 1Rx8 CL40 1.1V registered DIMMs in every populated channel, so older modules with different specs would prevent the kit from running at its rated speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.