Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 UDIMM sticks in a clear plastic tray

NEMIX RAM

NEMIX RAM DDR5 5600 32GB 2x16GB CL46 1.1V UDIMM Supermicro X13SAW-F

SKU CH-S3CA-NARAB

A 32 GB dual-channel DDR5 kit with two 16 GB unbuffered modules rated at 5600 MT/s, CL46 and 1.1 V, validated for the Supermicro X13SAW-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB kit delivers full capacity at rated speed
  • Exact-match DDR5-5600 timing recognised by Supermicro X13SAW-F
  • 1Rx8 Non-ECC unbuffered UDIMM fits board memory rules
  • Major OEM chips tested stable at CL46 1.1 V
  • Lifetime replacement warranty with US technical support

Exact-match DDR5 kit for Supermicro X13SAW-F

This 32 GB kit contains two 16 GB DDR5 5600 UDIMMs built to the board's exact specifications. The modules run at 1.1 V with CL46 timing and a 1Rx8 layout so the memory controller recognises the full capacity at rated speed.

Sustained-load behaviour without a heat spreader

The modules operate at the standard 1.10 V DDR5 voltage and are tested for stability at 5600 MT/s under continuous workloads. Major OEM chips from Samsung, Micron or Hynix provide consistent throughput during long compute sessions even without a heatsink.

Replaces slower or smaller DDR5 kits on this

Upgrading from a lower-capacity or lower-speed DDR5 kit is worthwhile when the board's memory-population rules allow both slots to be filled. Buyers who need ECC registered modules or SODIMM form factors cannot use this unbuffered UDIMM kit.

Priekšrocības

  • 32 GB kit delivers full capacity at rated speed
  • Exact-match DDR5-5600 timing recognised by Supermicro X13SAW-F
  • 1Rx8 Non-ECC unbuffered UDIMM fits board memory rules
  • Major OEM chips tested stable at CL46 1.1 V
  • Lifetime replacement warranty with US technical support

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much power does the 1.1V DDR5 5600 kit draw when the system runs all day?

Each module operates at 1.10V, the standard voltage for DDR5 5600, so power draw stays at the JEDEC baseline for this speed grade.

What must the motherboard provide for this 288-pin UDIMM kit to work?

The board needs two DDR5 UDIMM slots wired for non-ECC unbuffered memory and a memory controller that supports 5600 MT/s at CL46 with 1Rx8 modules.

Will the 1Rx8 rank layout work alongside any existing DDR5 sticks I keep in the other slots?

The kit uses a single-rank 1Rx8 organisation; mixing ranks is usually possible if the motherboard's population rules allow it, but matched kits give the most stable operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.