Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR5 UDIMM sticks in a clear plastic tray

NEMIX RAM

NEMIX RAM DDR5 5600 32GB 2x16GB CL46 1.1V UDIMM Supermicro X13SAW-F

SKU CH-S3CA-NARAB

A 32 GB dual-channel DDR5 kit with two 16 GB unbuffered modules rated at 5600 MT/s, CL46 and 1.1 V, validated for the Supermicro X13SAW-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB kit delivers full capacity at rated speed
  • Exact-match DDR5-5600 timing recognised by Supermicro X13SAW-F
  • 1Rx8 Non-ECC unbuffered UDIMM fits board memory rules
  • Major OEM chips tested stable at CL46 1.1 V
  • Lifetime replacement warranty with US technical support

Exact-match DDR5 kit for Supermicro X13SAW-F

This 32 GB kit contains two 16 GB DDR5 5600 UDIMMs built to the board's exact specifications. The modules run at 1.1 V with CL46 timing and a 1Rx8 layout so the memory controller recognises the full capacity at rated speed.

Sustained-load behaviour without a heat spreader

The modules operate at the standard 1.10 V DDR5 voltage and are tested for stability at 5600 MT/s under continuous workloads. Major OEM chips from Samsung, Micron or Hynix provide consistent throughput during long compute sessions even without a heatsink.

Replaces slower or smaller DDR5 kits on this

Upgrading from a lower-capacity or lower-speed DDR5 kit is worthwhile when the board's memory-population rules allow both slots to be filled. Buyers who need ECC registered modules or SODIMM form factors cannot use this unbuffered UDIMM kit.

Points forts

  • 32 GB kit delivers full capacity at rated speed
  • Exact-match DDR5-5600 timing recognised by Supermicro X13SAW-F
  • 1Rx8 Non-ECC unbuffered UDIMM fits board memory rules
  • Major OEM chips tested stable at CL46 1.1 V
  • Lifetime replacement warranty with US technical support

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

How much power does the 1.1V DDR5 5600 kit draw when the system runs all day?

Each module operates at 1.10V, the standard voltage for DDR5 5600, so power draw stays at the JEDEC baseline for this speed grade.

What must the motherboard provide for this 288-pin UDIMM kit to work?

The board needs two DDR5 UDIMM slots wired for non-ECC unbuffered memory and a memory controller that supports 5600 MT/s at CL46 with 1Rx8 modules.

Will the 1Rx8 rank layout work alongside any existing DDR5 sticks I keep in the other slots?

The kit uses a single-rank 1Rx8 organisation; mixing ranks is usually possible if the motherboard's population rules allow it, but matched kits give the most stable operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.