Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM DDR5 5600 576GB (12x48GB) CL46 ECC RDIMM GIGABYTE MZ73-LM1 memory upgrade

SKU CH-SPG4-ZQJQG

A 576 GB DDR5 5600 registered ECC kit in twelve 48 GB modules at CL46 and 1.1 V, validated for the Gigabyte MZ73-LM1 motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 576GB total capacity for memory-intensive workloads using twelve 48GB modules
  • DDR5 5600 speed with CL46 latency for high-throughput server tasks
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 10V operation at 2Rx8 rank matches motherboard memory controller specifications
  • 288-pin RDIMM form factor verified for GIGABYTE MZ73-LM1 compatibility

Exact-match server memory kit

This 576GB kit contains 12 modules of 48GB DDR5 5600 RDIMM memory built for the GIGABYTE MZ73-LM1 motherboard. Each module is a 2Rx8 registered ECC DIMM operating at 1.1V with CL46 timing. The kit delivers the precise rank, voltage and timing the board's memory controller expects for full-capacity recognition at rated speed.

DDR5 RDIMM population limits

DDR5 registered DIMMs allow full-slot population on supported server boards because the register buffers address and command signals. The MZ73-LM1 memory population rules still dictate which slots must be filled first and the maximum capacity per channel. Exceeding the board's approved DIMM-per-channel limit or ignoring the installation order will prevent the system from posting or running at the rated 5600 MT/s.

Registered ECC build for 288-pin slots

Modules use a 288-pin RDIMM form factor without heat spreaders, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are occupied, while on-die ECC corrects single-bit errors before they reach the OS. Verify the motherboard manual for supported capacities, population sequence and BIOS settings before installation.

Priekšrocības

  • 576GB total capacity for memory-intensive workloads using twelve 48GB modules
  • DDR5 5600 speed with CL46 latency for high-throughput server tasks
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 10V operation at 2Rx8 rank matches motherboard memory controller specifications
  • 288-pin RDIMM form factor verified for GIGABYTE MZ73-LM1 compatibility

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Should I choose the 576GB kit or a smaller capacity for my GIGABYTE MZ73-LM1?

The 576GB kit provides 12 modules of 48GB each, fully populating all slots at the board's supported DDR5 5600 speed with CL46 timing and 1.1V operation.

What does the DDR5 5600 rating mean for actual throughput in this server?

DDR5 5600 (PC5-44800) delivers 44800 MB/s per module; with 12 modules installed the memory subsystem can scale aggregate bandwidth across all channels.

How does the 288-pin RDIMM interface and registered design affect my GIGABYTE MZ73-LM1 configuration?

The 288-pin RDIMM form factor with registered (buffered) architecture is required by the MZ73-LM1; it allows all 12 slots to run fully populated at 5600 MT/s while ECC corrects single-bit errors.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.