Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-5600 96GB (6x16GB) ECC RDIMM CL46 1.1V 288-Pin Kit for Gigabyte MZ23-SU0 memory upgrade

SKU CH-XHMW-BCCCD

Six 16 GB DDR5-5600 registered ECC RDIMMs at CL46 and 1.1 V deliver a 96 GB upgrade validated for the Gigabyte MZ23-SU0

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Skatīt vēl 24 konfigurācijas
  • 96 GB total capacity lets your Gigabyte MZ23-SU0 run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 MT/s CL46 1.1 V timing matches the board's exact controller requirements
  • 6 × 16 GB 1Rx8 modules fill every slot for maximum density without down-clocking
  • 288-pin RDIMM form factor is the precise fit the MZ23-SU0 memory population rules demand

Exact-match server kit

This NEMIX RAM kit delivers 96 GB of DDR5 registered ECC memory across six 16 GB RDIMMs. It is built for administrators upgrading a Gigabyte MZ23-SU0 motherboard that requires the precise rank, voltage and timing profile the board's memory controller expects.

288-pin RDIMM form factor

The modules use the 288-pin registered DIMM form factor this platform requires, not an unbuffered UDIMM or SODIMM alternative. Registered architecture offloads the memory controller so every slot runs fully populated at the rated 5600 MT/s speed with CL46 latency at 1.1 V.

Enterprise stability in a populated chassis

ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots in production workloads. The kit frees you from mixing modules of different ranks or voltages, but it does not suit systems that only accept unbuffered memory or boards with fewer than six compatible slots.

Priekšrocības

  • 96 GB total capacity lets your Gigabyte MZ23-SU0 run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 MT/s CL46 1.1 V timing matches the board's exact controller requirements
  • 6 × 16 GB 1Rx8 modules fill every slot for maximum density without down-clocking
  • 288-pin RDIMM form factor is the precise fit the MZ23-SU0 memory population rules demand

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the DDR5-5600 CL46 modules run at their rated 5600 MT/s speed in a Gigabyte MZ23-SU0 with all six slots populated?

Yes, the kit is spec-matched to the MZ23-SU0 so the memory controller recognises the 1Rx8 registered ECC DIMMs at full 5600 MT/s when all six slots are filled.

Does the PC5-44800 rating limit the transfer rate to 5600 MT/s even if the platform supports higher DDR5 speeds?

PC5-44800 is the JEDEC standard name for DDR5-5600; the modules are validated at 5600 MT/s and will not run faster unless the board and BIOS explicitly support overclocking registered ECC DIMMs.

Do these 288-pin RDIMMs need a heat spreader or extra clearance to fit the MZ23-SU0 DIMM slots?

No, the modules have no heat spreader and use the standard 288-pin RDIMM height, so they fit the MZ23-SU0 slots without additional clearance.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.