Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with gold edge contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 CL46 32GB 2Rx8 ECC Registered RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-K6VV-S874J

32 GB DDR5 5600 RDIMM with ECC and registered design, validated for the Supermicro H13SSL-NT motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

Skatīt vēl 24 konfigurācijas
  • 32 GB DDR5-5600 capacity ready for Supermicro H13SSL-NT
  • CL46 CAS latency and 1.1 V voltage match server memory-controller specs
  • 2Rx8 registered ECC RDIMM prevents single-bit errors under full load
  • 288-pin DDR5 form factor fits exactly the slots your board requires
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

Server-grade DDR5 RDIMM for Supermicro H13SSL-NT

This 32 GB DDR5 5600 registered ECC module is built as an exact-match upgrade for the Supermicro H13SSL-NT motherboard. The 2Rx8 organisation, 1.1 V operating voltage and CL46 latency match the board's memory controller expectations so the full capacity is recognised at rated speed. Registered buffering allows every slot to be populated without overloading the controller.

Low-voltage operation and registered buffering

Running at 1.1 V keeps power draw per module modest while the registered architecture reduces electrical load on the memory controller during normal operation. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption without adding audible noise since the module has no heat spreader or active cooling. Typical server airflow is sufficient for steady-state temperatures.

Sustained load stability in fully populated configs

Under continuous heavy workloads the registered design maintains signal integrity across all populated slots, letting the system run at the full 5600 MT/s data rate without throttling. ECC continues to detect and correct errors throughout extended runs, avoiding the unplanned reboots that unbuffered memory can permit. Verify your motherboard manual for approved DIMM population order before installing.

Priekšrocības

  • 32 GB DDR5-5600 capacity ready for Supermicro H13SSL-NT
  • CL46 CAS latency and 1.1 V voltage match server memory-controller specs
  • 2Rx8 registered ECC RDIMM prevents single-bit errors under full load
  • 288-pin DDR5 form factor fits exactly the slots your board requires
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 288-pin RDIMM in the Supermicro H13SSL-NT and which population rule is often missed?

Align the module key with the slot notch, press straight down until both ejector tabs click, then follow the motherboard manual for the correct slot sequence — typically filling the same channel first — so the 2Rx8 registered DIMM initializes at DDR5 5600 CL46.

What maintenance or replacement will the 32GB DDR5 5600 ECC RDIMM need later?

No routine maintenance is required; the module has no heat spreader, so keep server airflow clean. If a single-bit error persists after ECC correction, replace the stick under the lifetime replacement warranty.

What limit appears first when the 2Rx8 registered DIMM runs sustained workloads at 1.1V?

The registered buffer and ECC logic keep signal integrity at the rated 5600 MT/s, so the first practical limit is the motherboard's maximum supported capacity per slot or total memory population ceiling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.