Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 1.5TB 16x96GB memory upgrade

SKU CH-D29N-MACH0

A 1.5 TB DDR5 server memory kit with 16 registered ECC modules at 5600 MHz for Supermicro H14DST-FL motherboards

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 5TB total capacity from 16 modules of 96GB each
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • Registered ECC architecture prevents silent data corruption
  • 1V operation matches server memory controller requirements
  • Verified compatibility with Supermicro H14DST-FL motherboard

Server Memory Kit

This 1.5 TB DDR5 registered ECC kit contains sixteen 96 GB modules built for the Supermicro H14DST-FL motherboard. It targets administrators who need maximum capacity on that platform without mixing modules.

288-Pin RDIMM Fit

The 288-pin registered DIMM form factor matches the board's required slot type and population rules. Registered architecture reduces electrical load on the memory controller when every slot is filled.

Capacity and Limits

Sixteen ranks of 2Rx4 modules deliver the full 1.5 TB at DDR5-5600 with CL46 timing at 1.1 V. ECC corrects single-bit errors to protect data integrity. Buyers needing more than sixteen slots or a different form factor must choose another solution.

Priekšrocības

  • 5TB total capacity from 16 modules of 96GB each
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • Registered ECC architecture prevents silent data corruption
  • 1V operation matches server memory controller requirements
  • Verified compatibility with Supermicro H14DST-FL motherboard

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 5600 MT/s speed hold when all 16 slots are populated on the H14DST-FL?

The kit is spec-matched to the Supermicro H14DST-FL memory-population rules, so the registered DIMMs run at the rated DDR5-5600 speed with every slot filled.

How much heat and power does the 1.5 TB kit generate during 24/7 server operation?

Each 96 GB module runs at 1.10 V with no heat spreader; registered buffering lowers electrical load on the memory controller, keeping thermals and draw modest for continuous duty.

What motherboard and CPU combination is required before this memory will function?

A Supermicro H14DST-FL motherboard with a compatible processor that supports DDR5-5600 registered ECC DIMMs is needed for the kit to be recognised and operate correctly.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.