Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Sixteen green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 1.5TB 16x96GB memory upgrade

SKU CH-D29N-MACH0

A 1.5 TB DDR5 server memory kit with 16 registered ECC modules at 5600 MHz for Supermicro H14DST-FL motherboards

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Zobrazit dalších 30 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 5TB total capacity from 16 modules of 96GB each
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • Registered ECC architecture prevents silent data corruption
  • 1V operation matches server memory controller requirements
  • Verified compatibility with Supermicro H14DST-FL motherboard

Server Memory Kit

This 1.5 TB DDR5 registered ECC kit contains sixteen 96 GB modules built for the Supermicro H14DST-FL motherboard. It targets administrators who need maximum capacity on that platform without mixing modules.

288-Pin RDIMM Fit

The 288-pin registered DIMM form factor matches the board's required slot type and population rules. Registered architecture reduces electrical load on the memory controller when every slot is filled.

Capacity and Limits

Sixteen ranks of 2Rx4 modules deliver the full 1.5 TB at DDR5-5600 with CL46 timing at 1.1 V. ECC corrects single-bit errors to protect data integrity. Buyers needing more than sixteen slots or a different form factor must choose another solution.

Přednosti

  • 5TB total capacity from 16 modules of 96GB each
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • Registered ECC architecture prevents silent data corruption
  • 1V operation matches server memory controller requirements
  • Verified compatibility with Supermicro H14DST-FL motherboard

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 5600 MT/s speed hold when all 16 slots are populated on the H14DST-FL?

The kit is spec-matched to the Supermicro H14DST-FL memory-population rules, so the registered DIMMs run at the rated DDR5-5600 speed with every slot filled.

How much heat and power does the 1.5 TB kit generate during 24/7 server operation?

Each 96 GB module runs at 1.10 V with no heat spreader; registered buffering lowers electrical load on the memory controller, keeping thermals and draw modest for continuous duty.

What motherboard and CPU combination is required before this memory will function?

A Supermicro H14DST-FL motherboard with a compatible processor that supports DDR5-5600 registered ECC DIMMs is needed for the kit to be recognised and operate correctly.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.