Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 256GB (8x32GB) CL46 1.1V Supermicro H13SSL-NT

SKU CH-3YP8-TB97T

Eight 32 GB DDR5 5600 registered ECC RDIMMs deliver 256 GB at 1.1 V CL46 for Supermicro H13SSL-NT

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256GB total capacity from eight 32GB modules enables full server population
  • DDR5-5600 speed with CL46 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation matches the motherboard's voltage requirement for stable full-speed performance
  • 288-pin RDIMM form factor fits the Supermicro H13SSL-NT memory slots exactly

Supermicro H13SSL-NT DDR5 kit

This 256GB memory kit is built for the Supermicro H13SSL-NT motherboard. It contains eight 32GB DDR5 Registered ECC RDIMMs validated for that platform. System builders and IT teams populating every slot on this board receive the exact rank, voltage and timing the memory controller expects. Workstations needing unbuffered UDIMMs or laptop SODIMMs cannot use these modules.

Registered ECC RDIMM form factor

Each module uses the 288-pin Registered RDIMM design with a 2Rx8 organisation and operates at 1.1V. The buffered architecture reduces electrical load on the memory controller so all eight slots run at the rated 5600 speed without signal degradation. On-board ECC corrects single-bit errors automatically, preventing silent data corruption in production workloads. The kit ships without heat spreaders, so airflow across the DIMMs must be managed by the server chassis.

DDR5 5600 PC5-44800 CL46 limits

The DDR5 5600 (PC5-44800) interface sets the maximum data rate and the CL46 latency ceiling for this kit. Population rules in the motherboard manual dictate which slots must be filled first and whether mixed capacities are allowed. Exceeding the board's qualified DIMM count or mixing unvalidated ranks will prevent the system from posting at the advertised speed. Consult the system manual before installation to confirm supported configurations.

Priekšrocības

  • 256GB total capacity from eight 32GB modules enables full server population
  • DDR5-5600 speed with CL46 latency delivers rated bandwidth for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation matches the motherboard's voltage requirement for stable full-speed performance
  • 288-pin RDIMM form factor fits the Supermicro H13SSL-NT memory slots exactly

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What does the DDR5 5600 (PC5-44800) rating mean for real-world data throughput?

The kit is specified at DDR5 5600, which corresponds to a PC5-44800 transfer rate of 5600 MT/s per module.

Will these 288-pin RDIMMs physically fit the Supermicro H13SSL-NT motherboard?

Yes, the 288-pin Registered RDIMM form factor matches the slots on the Supermicro H13SSL-NT; UDIMM or SODIMM modules would not fit.

What is the correct population order for eight 32 GB RDIMMs on this board?

Install all eight modules following the exact DIMM sequence shown in the Supermicro H13SSL-NT manual; skipping a slot or changing the order can prevent the system from recognizing the full 256 GB capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.