BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277195BTC
Krājumā
NEMIX RAM
NEMIX RAM DDR5-6400 1TB (8x128GB) ECC RDIMM CL52 1.1V 2Rx4 Supermicro H13DSH
Eight 128 GB DDR5-6400 ECC registered RDIMMs at CL52 and 1.1 V for the Supermicro H13DSH
- Capacity1TB (8 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity across eight 128GB modules for maximum server density
- DDR5-6400 CL52 at 1.1V delivers rated speed without tuning
- Registered ECC architecture prevents silent data corruption under full load
- 2Rx4 288-pin RDIMM form factor matches Supermicro H13DSH slot requirements
- Major OEM Samsung, Micron, or Hynix chips ensure enterprise-grade reliability
Exact-fit DDR5-6400 kit for Supermicro H13DSH
This 1 TB kit contains eight 128 GB DDR5-6400 registered ECC RDIMMs built to the 2Rx4, 1.10 V, CL52 specification the H13DSH memory controller expects. It targets administrators who need maximum supported capacity in every slot without manual tuning.
Replaces mixed-capacity or slower DDR5 populations
When a server runs partially populated channels or lower-speed modules, the memory controller down-clocks the entire bus. Installing this matched 8-module kit restores full-channel bandwidth at the rated 6400 MT/s and removes the latency penalty of rank-mismatched DIMMs.
Delivers 1 TB across eight channels for dense
The registered architecture keeps electrical loading low so all eight slots operate at rated speed, while ECC corrects single-bit errors in flight. Workloads that exceed 1 TB per socket or require more than eight DIMM slots per processor will need a platform with higher capacity limits.
Priekšrocības
- 1TB capacity across eight 128GB modules for maximum server density
- DDR5-6400 CL52 at 1.1V delivers rated speed without tuning
- Registered ECC architecture prevents silent data corruption under full load
- 2Rx4 288-pin RDIMM form factor matches Supermicro H13DSH slot requirements
- Major OEM Samsung, Micron, or Hynix chips ensure enterprise-grade reliability
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K8 |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13DSH memory slots?
Yes, the kit uses the exact 288-pin Registered DDR5 form factor that the H13DSH requires; it is not a UDIMM or SODIMM and matches the board's physical slot keying.
What is the correct population order when installing all eight 128GB modules on the H13DSH?
Install the modules in the sequence specified in the H13DSH manual — typically filling one DIMM per channel first, then the second slot per channel — so the memory controller recognises the full 1TB at DDR5-6400 CL52.
Do the modules need active cooling or heat-spreader replacement over time?
The modules ship without heat spreaders and rely on the server's chassis airflow; as long as the system fans maintain the rated 1.10V operating temperature, no additional cooling or spreader replacement is required.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
