Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM DDR5-6400 1TB (8x128GB) ECC RDIMM CL52 1.1V 2Rx4 Supermicro H13DSH

SKU CH-8E14-QFVX7

Eight 128 GB DDR5-6400 ECC registered RDIMMs at CL52 and 1.1 V for the Supermicro H13DSH

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB capacity across eight 128GB modules for maximum server density
  • DDR5-6400 CL52 at 1.1V delivers rated speed without tuning
  • Registered ECC architecture prevents silent data corruption under full load
  • 2Rx4 288-pin RDIMM form factor matches Supermicro H13DSH slot requirements
  • Major OEM Samsung, Micron, or Hynix chips ensure enterprise-grade reliability

Exact-fit DDR5-6400 kit for Supermicro H13DSH

This 1 TB kit contains eight 128 GB DDR5-6400 registered ECC RDIMMs built to the 2Rx4, 1.10 V, CL52 specification the H13DSH memory controller expects. It targets administrators who need maximum supported capacity in every slot without manual tuning.

Replaces mixed-capacity or slower DDR5 populations

When a server runs partially populated channels or lower-speed modules, the memory controller down-clocks the entire bus. Installing this matched 8-module kit restores full-channel bandwidth at the rated 6400 MT/s and removes the latency penalty of rank-mismatched DIMMs.

Delivers 1 TB across eight channels for dense

The registered architecture keeps electrical loading low so all eight slots operate at rated speed, while ECC corrects single-bit errors in flight. Workloads that exceed 1 TB per socket or require more than eight DIMM slots per processor will need a platform with higher capacity limits.

Přednosti

  • 1TB capacity across eight 128GB modules for maximum server density
  • DDR5-6400 CL52 at 1.1V delivers rated speed without tuning
  • Registered ECC architecture prevents silent data corruption under full load
  • 2Rx4 288-pin RDIMM form factor matches Supermicro H13DSH slot requirements
  • Major OEM Samsung, Micron, or Hynix chips ensure enterprise-grade reliability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13DSH memory slots?

Yes, the kit uses the exact 288-pin Registered DDR5 form factor that the H13DSH requires; it is not a UDIMM or SODIMM and matches the board's physical slot keying.

What is the correct population order when installing all eight 128GB modules on the H13DSH?

Install the modules in the sequence specified in the H13DSH manual — typically filling one DIMM per channel first, then the second slot per channel — so the memory controller recognises the full 1TB at DDR5-6400 CL52.

Do the modules need active cooling or heat-spreader replacement over time?

The modules ship without heat spreaders and rely on the server's chassis airflow; as long as the system fans maintain the rated 1.10V operating temperature, no additional cooling or spreader replacement is required.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.