Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM MD19200-628K2 32GB (2x16GB) DDR4 2400 CL17 desktop RAM

SKU CH-6AA2-VM0J9

A 32 GB dual-channel kit of 2400 MHz DDR4 UDIMM memory in two 16 GB modules with CL17 latency and 1.2 V operation

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Kit configuration and target use

This NEMIX RAM kit supplies 32 GB of DDR4 memory in two 16 GB modules. The dual-channel pair is built for standard desktop boards that accept 288-pin UDIMM slots and do not require ECC or registered DIMMs. It suits office workstations, home PCs and light content-creation rigs that need reliable capacity without overclocking headroom.

Behaviour under sustained load

Running at 2400 MT/s with CL17 timings and a fixed 1.20 V supply, the modules deliver steady throughput during long compile jobs, virtual-machine workloads or extended browsing sessions. The unbuffered design keeps latency predictable, while the 2Rx8 organisation helps maintain bandwidth when all ranks are active for hours at a time.

Compatibility checks before ordering

Verify that your motherboard supports DDR4 2400 non-ECC UDIMM memory and has two free 288-pin slots. Confirm the board can operate at 1.20 V without manual voltage adjustment. Ensure the CPU memory controller is rated for at least 2400 MT/s so the kit runs at its labelled speed without down-clocking.

Priekšrocības

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-628K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this kit fit a standard desktop motherboard that takes 288-pin DDR4 UDIMM modules?

Yes, the kit uses 288-pin DDR4 UDIMM form factor at 1.20 V, which matches standard desktop DIMM slots.

My board only runs memory at 2400 MT/s — will these modules work without manual BIOS changes?

The modules are rated for DDR4 2400 (PC4-19200) at CL17, so they will operate at that speed on a board limited to 2400 MT/s.

Does the 2Rx8 organisation on each 16 GB module affect compatibility with consumer chipsets?

2Rx8 is a common density for 16 GB DDR4 UDIMMs and is supported by most consumer desktop chipsets that accept 32 GB kits.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.