We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM MD19200-628K2 32GB (2x16GB) DDR4 2400 CL17 desktop RAM

SKU CH-6AA2-VM0J9

A 32 GB dual-channel kit of 2400 MHz DDR4 UDIMM memory in two 16 GB modules with CL17 latency and 1.2 V operation

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Kit configuration and target use

This NEMIX RAM kit supplies 32 GB of DDR4 memory in two 16 GB modules. The dual-channel pair is built for standard desktop boards that accept 288-pin UDIMM slots and do not require ECC or registered DIMMs. It suits office workstations, home PCs and light content-creation rigs that need reliable capacity without overclocking headroom.

Behaviour under sustained load

Running at 2400 MT/s with CL17 timings and a fixed 1.20 V supply, the modules deliver steady throughput during long compile jobs, virtual-machine workloads or extended browsing sessions. The unbuffered design keeps latency predictable, while the 2Rx8 organisation helps maintain bandwidth when all ranks are active for hours at a time.

Compatibility checks before ordering

Verify that your motherboard supports DDR4 2400 non-ECC UDIMM memory and has two free 288-pin slots. Confirm the board can operate at 1.20 V without manual voltage adjustment. Ensure the CPU memory controller is rated for at least 2400 MT/s so the kit runs at its labelled speed without down-clocking.

Highlights

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-628K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this kit fit a standard desktop motherboard that takes 288-pin DDR4 UDIMM modules?

Yes, the kit uses 288-pin DDR4 UDIMM form factor at 1.20 V, which matches standard desktop DIMM slots.

My board only runs memory at 2400 MT/s — will these modules work without manual BIOS changes?

The modules are rated for DDR4 2400 (PC4-19200) at CL17, so they will operate at that speed on a board limited to 2400 MT/s.

Does the 2Rx8 organisation on each 16 GB module affect compatibility with consumer chipsets?

2Rx8 is a common density for 16 GB DDR4 UDIMMs and is supported by most consumer desktop chipsets that accept 32 GB kits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.