We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR4 2400 CL17 1.2V 288-Pin Non-ECC UDIMM desktop RAM

SKU CH-3MCE-NRY97

Four 16 GB DDR4 modules totalling 64 GB run at 2400 MT/s with CL17 latency and 1.2 V on standard 288-pin UDIMM slots

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 64GB (4 x 16GB)

  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 speed rated at PC4 19200 bandwidth
  • CL17 latency at standard 1.20 V operation
  • 288 pin unbuffered non ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipsets

64 GB DDR4 Kit for Desktop Systems

This kit delivers 64 GB of DDR4 memory across four 16 GB unbuffered UDIMM modules. It runs at 2400 MT/s with a CAS latency of CL17 and operates at the standard 1.20 V. The modules use major OEM chips from Samsung, Micron or Hynix and carry no heat spreaders or lighting.

Suits Standard DDR4 Platforms Seeking Capacity

The 288-pin non-ECC design fits mainstream desktop motherboards that support DDR4 2400 PC4-19200 memory. Builders needing ECC error correction, registered modules or higher frequencies should look at different product lines. The quad-channel population also requires a board with four slots.

Steady Throughput Under Continuous Load

Each module is stress-tested under sustained workloads to verify stability before shipping. Without heat spreaders, thermal performance depends on case airflow, but the low 1.20 V voltage helps keep temperatures manageable during extended compute sessions. The unbuffered topology adds minimal latency for consistent data flow.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 speed rated at PC4 19200 bandwidth
  • CL17 latency at standard 1.20 V operation
  • 288 pin unbuffered non ECC UDIMM form factor
  • Built with major OEM Samsung Micron Hynix chipsets

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-628K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this kit work in a motherboard that only supports DDR4 2400 speeds?

Yes, the modules run at DDR4 2400 (PC4-19200) with CL17 latency at 1.20 V, matching that specification exactly.

Do I need to enable any special profile in the BIOS to reach the rated speed?

The kit operates at standard JEDEC DDR4 2400 settings, so it will run at the rated speed without enabling XMP or manual tuning.

Can I add this 64 GB kit alongside my existing 16 GB DDR4 sticks?

Mixing kits is possible but not guaranteed; for best stability use identical modules, so a full 4 x 16 GB replacement is recommended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.