Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MR51200-924K2 128GB 2x64GB DDR5 6400 CL52 1.1V ECC RDIMM memory upgrade for GIGABYTE MZ73-LM1

SKU CH-TF9A-DQKR0

128 GB DDR5 6400 CL52 ECC registered RDIMM kit with two 64 GB modules at 1.1 V, validated for the GIGABYTE MZ73-LM1 motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Skatīt vēl 24 konfigurācijas
  • 128 GB total capacity from two 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for Gigabyte MZ73-LM1
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 10 V operation at 2Rx4 rank matches the board's memory controller requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every slot

128GB DDR5 RDIMM kit for GIGABYTE MZ73-LM1

This NEMIX RAM kit delivers 128GB across two 64GB DDR5-6400 Registered ECC modules. It matches the exact rank, voltage and timing the GIGABYTE MZ73-LM1 memory controller expects for full-capacity recognition at rated speed. The 288-pin RDIMM form factor is the only type this board accepts.

Upgrade from lower-capacity or unbuffered DDR5

Replacing smaller RDIMMs or non-ECC UDIMMs with this 2Rx4 Registered kit enables the board to run every slot fully populated at 6400MT/s while adding on-the-fly single-bit error correction. The jump is worth it when workloads demand maximum registered capacity and data integrity without unplanned reboots.

DDR5 RDIMM platform limits

Registered DDR5 architecture offloads the memory controller so all slots operate at full capacity, but the motherboard manual still governs supported populations and installation order. Buyers who need more storage than 128GB or who require UDIMM or SODIMM form factors cannot use this kit.

Priekšrocības

  • 128 GB total capacity from two 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for Gigabyte MZ73-LM1
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 10 V operation at 2Rx4 rank matches the board's memory controller requirements
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every slot

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 288-pin RDIMM modules fit the GIGABYTE MZ73-LM1 motherboard DIMM slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the GIGABYTE MZ73-LM1 motherboard. It is not a UDIMM or SODIMM, so it matches the board's physical slot specification exactly.

What is the correct installation order for the two 64GB modules on this board?

Install the modules in the DIMM slots specified by the GIGABYTE MZ73-LM1 manual for a two-DIMM population. The motherboard manual defines the approved population order; following it ensures the memory controller recognizes both 64GB modules at the rated DDR5 6400 speed.

When should the ECC RDIMM modules be replaced in a production server?

Replace modules if the system logs report uncorrectable ECC errors, repeated correctable error thresholds are exceeded, or the server fails memory diagnostics during POST. Registered ECC RDIMMs correct single-bit errors on the fly, but persistent faults indicate hardware degradation requiring replacement.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.