Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM POSIFLEX POS DDR3 1333 8GB 2Rx8 1.35V SODIMM memory upgrade

SKU CH-QFNV-CRZVC

8GB DDR3 SODIMM running at 1333MHz with 1.35V operation for POSIFLEX HS-3512W terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB DDR3 SODIMM expands POS terminal capacity
  • 1333 MHz speed handles retail workloads smoothly
  • 35V low-voltage operation reduces system power draw
  • 204-pin form factor fits POSIFLEX HS-3512W all-in-one
  • Major OEM chips deliver tested reliability for kiosks

Compatible POSIFLEX HS-3512W Upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX HS-3512W compact all-in-one terminal. It delivers a direct memory increase for point-of-sale workloads and kiosk applications that rely on stable, low-voltage operation.

Suited for Single-Slot Terminals

The module fits systems that accept one 204-pin DDR3 SODIMM running at 1333 MHz with CL9 latency. It is not for platforms that require ECC, registered buffers, dual-rank limits different from 2Rx8, or voltages other than 1.35 V.

Verify Slot and Voltage First

Confirm the terminal has a free 204-pin SODIMM slot and that the BIOS supports 1.35 V DDR3 1333 non-ECC unbuffered memory. Check the service manual for maximum capacity per slot before ordering.

Priekšrocības

  • 8GB DDR3 SODIMM expands POS terminal capacity
  • 1333 MHz speed handles retail workloads smoothly
  • 35V low-voltage operation reduces system power draw
  • 204-pin form factor fits POSIFLEX HS-3512W all-in-one
  • Major OEM chips deliver tested reliability for kiosks

Specifikācijas

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Jautājumi par šo preci

What motherboard slot does the 204-pin DDR3 SODIMM require?

The module fits a 204-pin DDR3 SO-DIMM socket on the POSIFLEX HS-3512W terminal motherboard.

Can this 1.35 V DDR3 1333 module run with existing 1.50 V DDR3 sticks?

Yes, the system will operate both modules at the higher 1.50 V level and the common 1333 MT/s speed.

How do I verify the 8 GB module is detected at PC3-10600 CL9 after installation?

Check the BIOS memory summary or OS task manager; it should show 8 GB at 1333 MT/s with CL9 timings.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.