Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM POSIFLEX POS DDR3 1333 8GB 2Rx8 1.35V SODIMM memory upgrade

SKU CH-QFNV-CRZVC

8GB DDR3 SODIMM running at 1333MHz with 1.35V operation for POSIFLEX HS-3512W terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB DDR3 SODIMM expands POS terminal capacity
  • 1333 MHz speed handles retail workloads smoothly
  • 35V low-voltage operation reduces system power draw
  • 204-pin form factor fits POSIFLEX HS-3512W all-in-one
  • Major OEM chips deliver tested reliability for kiosks

Compatible POSIFLEX HS-3512W Upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX HS-3512W compact all-in-one terminal. It delivers a direct memory increase for point-of-sale workloads and kiosk applications that rely on stable, low-voltage operation.

Suited for Single-Slot Terminals

The module fits systems that accept one 204-pin DDR3 SODIMM running at 1333 MHz with CL9 latency. It is not for platforms that require ECC, registered buffers, dual-rank limits different from 2Rx8, or voltages other than 1.35 V.

Verify Slot and Voltage First

Confirm the terminal has a free 204-pin SODIMM slot and that the BIOS supports 1.35 V DDR3 1333 non-ECC unbuffered memory. Check the service manual for maximum capacity per slot before ordering.

Puncte forte

  • 8GB DDR3 SODIMM expands POS terminal capacity
  • 1333 MHz speed handles retail workloads smoothly
  • 35V low-voltage operation reduces system power draw
  • 204-pin form factor fits POSIFLEX HS-3512W all-in-one
  • Major OEM chips deliver tested reliability for kiosks

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

What motherboard slot does the 204-pin DDR3 SODIMM require?

The module fits a 204-pin DDR3 SO-DIMM socket on the POSIFLEX HS-3512W terminal motherboard.

Can this 1.35 V DDR3 1333 module run with existing 1.50 V DDR3 sticks?

Yes, the system will operate both modules at the higher 1.50 V level and the common 1333 MT/s speed.

How do I verify the 8 GB module is detected at PC3-10600 CL9 after installation?

Check the BIOS memory summary or OS task manager; it should show 8 GB at 1333 MT/s with CL9 timings.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.