Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Twenty square 60 by 25 mm 12 V 1.7 W three wire cooling fans in a lot

OEM Industries

OEM Industries 6025 KDE1206PTV1 MS.AF.GN 12V 1.7W 3Wire Cooling Fan

SKU CH-4FES-40S38

Pack of twenty 60 by 25 millimetre 12 volt 1.7 watt three-wire cooling fans

  • Pack of twenty fans simplifies bulk builds
  • Sunon 60 mm x 25 mm frame fits standard mounts
  • 12 V 1.7 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 6025 KDE1206PTV1 model ensures exact replacement

20-piece SUNON 60×25 mm fan lot

This lot supplies twenty SUNON 60×25 mm fans identified as KDE1206PTV1 MS.AF.GN. Each unit runs on 12 V and draws 1.7 W through a three-wire lead. The pack is aimed at system integrators or maintenance teams needing a quantity of identical replacement coolers.

Suited for 12 V three-wire headers

These fans suit builds that use a standard 12 V three-wire header and accept a 60 mm frame with 25 mm thickness. Buyers who need PWM speed control, a different voltage, a larger frame or a smaller quantity should look elsewhere.

12 V 1.7 W three-wire electrical spec

The decisive specification is the 12 V 1.7 W three-wire electrical interface. Confirm that your motherboard or controller provides a matching 12 V header and that the 6025 form factor fits the intended mounting points before ordering.

Priekšrocības

  • Pack of twenty fans simplifies bulk builds
  • Sunon 60 mm x 25 mm frame fits standard mounts
  • 12 V 1.7 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 6025 KDE1206PTV1 model ensures exact replacement

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I install the 6025 fan and which wire is often connected incorrectly?

Mount the 60 × 25 mm frame with four screws, connect the red wire to 12 V, black to ground, and the yellow wire to the motherboard tachometer header; the yellow lead is the one most often left loose.

What maintenance will the 6025 KDE1206PTV1 need over time?

Clean dust from the blades and heatsink fins every few months with compressed air; the sleeve bearing cannot be relubricated, so plan to replace the fan when noise or vibration increases.

What limit appears first when the 6025 runs continuously at 12 V?

The 1.7 W motor draws a fixed current, so the sleeve bearing temperature rises until thermal expansion increases friction, making bearing wear the first sustained-use limit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.