Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 70mm square Maglev fan, 20mm thick, three-pin connector

OEM Industries

OEM Industries DA07020R12U 70mm Maglev 3 Pin CPU cooler

SKU CH-TMWS-SV2DE

A 70 mm Maglev fan with a 12 V, 0.7 A three-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Compact 70 mm Maglev cooler

The OEM Industries DA07020R12U is a 70 mm square fan unit with a Maglev bearing and a 3 pin power connector. It draws 0.7 A at 12 V and has no LED lighting. The cooler is intended for low-profile CPU sockets or tight chassis where a 7020 form factor fits.

Simple 3 pin installation

Mount the fan using the four corner holes on the 70 mm frame and plug the 3 wire connector into a standard motherboard header. The Maglev bearing reduces friction, so the only common issue is cable reach in deeper cases. Ensure the header supplies 12 V for full speed operation.

Verify clearance and header type

Measure the available height above the socket to confirm the 20 mm thickness clears nearby components. Check that the motherboard provides a 3 pin fan header; a 4 pin header will work but speed control will be voltage-based. Confirm the mounting hole pattern matches the 70 mm square layout.

Priekšrocības

  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Specifikācijas

ModelDA07020R12U
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Jautājumi par šo preci

How can I confirm the 70mm Maglev fan is spinning correctly after installation?

Connect the 3 Pin connector to a 12V header and verify the fan rotates smoothly; the maglev bearing should run quietly at 0.7A draw.

What comes in the box and do I need a separate heatsink?

The package contains only the 70x20mm square fan unit; a compatible heatsink or mounting hardware must be purchased separately.

Which DA07020R12U version should I choose for a 12V 3 Pin header?

This model is the 12V 0.7A 3 Pin variant; select it when your motherboard or controller provides a standard 3 Pin 12V connection.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.