Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 70mm square Maglev fan, 20mm thick, three-pin connector

OEM Industries

OEM Industries DA07020R12U 70mm Maglev 3 Pin CPU cooler

SKU CH-TMWS-SV2DE

A 70 mm Maglev fan with a 12 V, 0.7 A three-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Compact 70 mm Maglev cooler

The OEM Industries DA07020R12U is a 70 mm square fan unit with a Maglev bearing and a 3 pin power connector. It draws 0.7 A at 12 V and has no LED lighting. The cooler is intended for low-profile CPU sockets or tight chassis where a 7020 form factor fits.

Simple 3 pin installation

Mount the fan using the four corner holes on the 70 mm frame and plug the 3 wire connector into a standard motherboard header. The Maglev bearing reduces friction, so the only common issue is cable reach in deeper cases. Ensure the header supplies 12 V for full speed operation.

Verify clearance and header type

Measure the available height above the socket to confirm the 20 mm thickness clears nearby components. Check that the motherboard provides a 3 pin fan header; a 4 pin header will work but speed control will be voltage-based. Confirm the mounting hole pattern matches the 70 mm square layout.

Fordele

  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Specifikationer

ModelDA07020R12U
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Spørgsmål om denne vare

How can I confirm the 70mm Maglev fan is spinning correctly after installation?

Connect the 3 Pin connector to a 12V header and verify the fan rotates smoothly; the maglev bearing should run quietly at 0.7A draw.

What comes in the box and do I need a separate heatsink?

The package contains only the 70x20mm square fan unit; a compatible heatsink or mounting hardware must be purchased separately.

Which DA07020R12U version should I choose for a 12V 3 Pin header?

This model is the 12V 0.7A 3 Pin variant; select it when your motherboard or controller provides a standard 3 Pin 12V connection.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.