Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 80mm Delta cooling fan with 4-pin connector

OEM Industries

OEM Industries FFC0812DE 80mm 4-Pin CPU Cooler

SKU CH-2GHA-8NNH0

An 80 mm ball-bearing fan with a 4-pin connector for precise CPU cooling control

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 80 mm fan fits compact CPU cooler builds
  • 4-pin PWM connector enables automatic speed control
  • dual ball bearing extends operating life
  • 12 V 1.80 A rating delivers strong airflow
  • no LED lighting keeps the interior dark

Compact 80 mm 4-pin cooler for tight builds

The OEM Industries FFC0812DE is an 80 mm fan-only air cooler with a four-pin connector. It fits small-form-factor chassis where full-height towers cannot be installed. System builders who need a direct replacement for a Delta 3FM0017215GP unit will find the same mounting pattern and power interface.

Ball-bearing motor rated at 12 V 1.80 A

The dual ball-bearing design runs on 12 V and draws 1.80 A through the four-wire lead. This electrical profile is the single specification that determines whether the cooler matches the header and power budget of the target board. Buyers who need a different voltage, current draw or connector layout cannot use this model.

Sustained airflow from dual ball bearings

Under continuous load the ball-bearing motor maintains consistent rotational speed without the wear pattern seen in sleeve alternatives. The four-pin interface allows the motherboard to modulate fan speed in response to temperature over long sessions. Users who require a heatsink assembly or integrated lighting should look elsewhere.

Priekšrocības

  • 80 mm fan fits compact CPU cooler builds
  • 4-pin PWM connector enables automatic speed control
  • dual ball bearing extends operating life
  • 12 V 1.80 A rating delivers strong airflow
  • no LED lighting keeps the interior dark

Specifikācijas

ModelFFC0812DE
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Jautājumi par šo preci

How loud is the 1.80 A fan when it spins up inside a case?

The 12 V, 1.80 A motor drives the 80 mm rotor on dual ball bearings; actual noise depends on the PWM curve set by the motherboard and on case airflow.

What does the 4-pin PWM connector actually control on this Delta unit?

The fourth wire carries the PWM signal so the board can vary speed from minimum to full 12 V RPM; the other three pins supply 12 V, ground and tach feedback.

Will the 80 mm square frame line up with standard 80 mm mounting holes?

The fan is an 80 mm square frame with four corner mounting holes spaced to the common 80 mm pattern used on heatsinks and chassis fan grills.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.