Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 80mm Delta cooling fan with 4-pin connector

OEM Industries

OEM Industries FFC0812DE 80mm 4-Pin CPU Cooler

SKU CH-2GHA-8NNH0

An 80 mm ball-bearing fan with a 4-pin connector for precise CPU cooling control

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 80 mm fan fits compact CPU cooler builds
  • 4-pin PWM connector enables automatic speed control
  • dual ball bearing extends operating life
  • 12 V 1.80 A rating delivers strong airflow
  • no LED lighting keeps the interior dark

Compact 80 mm 4-pin cooler for tight builds

The OEM Industries FFC0812DE is an 80 mm fan-only air cooler with a four-pin connector. It fits small-form-factor chassis where full-height towers cannot be installed. System builders who need a direct replacement for a Delta 3FM0017215GP unit will find the same mounting pattern and power interface.

Ball-bearing motor rated at 12 V 1.80 A

The dual ball-bearing design runs on 12 V and draws 1.80 A through the four-wire lead. This electrical profile is the single specification that determines whether the cooler matches the header and power budget of the target board. Buyers who need a different voltage, current draw or connector layout cannot use this model.

Sustained airflow from dual ball bearings

Under continuous load the ball-bearing motor maintains consistent rotational speed without the wear pattern seen in sleeve alternatives. The four-pin interface allows the motherboard to modulate fan speed in response to temperature over long sessions. Users who require a heatsink assembly or integrated lighting should look elsewhere.

Poudarki

  • 80 mm fan fits compact CPU cooler builds
  • 4-pin PWM connector enables automatic speed control
  • dual ball bearing extends operating life
  • 12 V 1.80 A rating delivers strong airflow
  • no LED lighting keeps the interior dark

Specifikacije

ModelFFC0812DE
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Vprašanja o tem izdelku

How loud is the 1.80 A fan when it spins up inside a case?

The 12 V, 1.80 A motor drives the 80 mm rotor on dual ball bearings; actual noise depends on the PWM curve set by the motherboard and on case airflow.

What does the 4-pin PWM connector actually control on this Delta unit?

The fourth wire carries the PWM signal so the board can vary speed from minimum to full 12 V RPM; the other three pins supply 12 V, ground and tach feedback.

Will the 80 mm square frame line up with standard 80 mm mounting holes?

The fan is an 80 mm square frame with four corner mounting holes spaced to the common 80 mm pattern used on heatsinks and chassis fan grills.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.