Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Frameless brown and transparent 9025 fan with three mounting holes and four-pin connector

OEM Industries

OEM Industries T129025SU 12V .38A 4-pin VGA fan CPU cooler

SKU CH-GH7W-0NJVK

12V 0.38A 4-pin sleeve-bearing fan with 39-40 mm mounting pitch for HD7970, HD7950 and GTX680 DirectCU II coolers

  • Color2-Tone
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector4 Pin
  • LEDNo
  • 12 V 0.38 A four-pin power for direct GPU cooling
  • Frameless design suits HD 7970 and HD 7950 cards
  • 39–40 mm mounting pitch fits reference board holes
  • Three mounting holes give secure frameless attachment
  • Brown and transparent two-tone finish matches OEM aesthetics

EVERFLOW T129025SU frameless fan

This EVERFLOW T129025SU is a frameless 12V 0.38A 4-pin fan designed as a VGA graphics card cooler. It features a sleeve bearing and a two-tone brown and transparent finish. The unit mounts using three holes with a 39-40mm pitch-row spacing. It serves as a direct replacement cooler for specific legacy cards.

Suits owners of listed legacy GPUs

This cooler fits owners of HD7970, HD7950, or GTX680 DirectCU II cards needing a like-for-like frameless fan replacement. The three-hole 39-40mm mounting pattern must match the original shroud exactly. Buyers with different graphics cards or standard square-frame mounting requirements should look elsewhere.

Mounting pitch-row decides compatibility

The 39-40mm pitch-row spacing between the three mounting holes is the single specification that determines if this part fits your card. Measure the hole centres on your existing cooler before purchase; a mismatch means the fan cannot be secured. No other dimensions or adapter options are provided.

Priekšrocības

  • 12 V 0.38 A four-pin power for direct GPU cooling
  • Frameless design suits HD 7970 and HD 7950 cards
  • 39–40 mm mounting pitch fits reference board holes
  • Three mounting holes give secure frameless attachment
  • Brown and transparent two-tone finish matches OEM aesthetics

Specifikācijas

ModelT129025SU
Color2-Tone
TypeFan only
Bearing TypeSleeve Bearing
Power Connector4 Pin
LEDNo

Jautājumi par šo preci

How do I mount the T129025SU fan onto a graphics card with 39 to 40 mm hole spacing?

Align the three mounting holes on the frameless cooler with the 39~40 mm pitch-row on cards such as the HD7970, HD7950 or GTX680 DirectCU II, then secure each hole with the correct screws before connecting the 4-pin power lead.

What maintenance does the sleeve-bearing fan require over time?

The sleeve bearing cannot be relubricated easily; when noise or vibration increases after extended use, replace the entire T129025SU unit rather than attempting a bearing service.

At what sustained load does the 0.38 A current limit become a constraint?

The fan draws 0.38 A at 12 V continuously; if the graphics card's fan header cannot supply that current steadily, the cooler will hit its electrical limit and may spin down or shut off.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.