Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Frameless brown and transparent 9025 fan with three mounting holes and four-pin connector

OEM Industries

OEM Industries T129025SU 12V .38A 4-pin VGA fan CPU cooler

SKU CH-GH7W-0NJVK

12V 0.38A 4-pin sleeve-bearing fan with 39-40 mm mounting pitch for HD7970, HD7950 and GTX680 DirectCU II coolers

  • Color2-Tone
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector4 Pin
  • LEDNo
  • 12 V 0.38 A four-pin power for direct GPU cooling
  • Frameless design suits HD 7970 and HD 7950 cards
  • 39–40 mm mounting pitch fits reference board holes
  • Three mounting holes give secure frameless attachment
  • Brown and transparent two-tone finish matches OEM aesthetics

EVERFLOW T129025SU frameless fan

This EVERFLOW T129025SU is a frameless 12V 0.38A 4-pin fan designed as a VGA graphics card cooler. It features a sleeve bearing and a two-tone brown and transparent finish. The unit mounts using three holes with a 39-40mm pitch-row spacing. It serves as a direct replacement cooler for specific legacy cards.

Suits owners of listed legacy GPUs

This cooler fits owners of HD7970, HD7950, or GTX680 DirectCU II cards needing a like-for-like frameless fan replacement. The three-hole 39-40mm mounting pattern must match the original shroud exactly. Buyers with different graphics cards or standard square-frame mounting requirements should look elsewhere.

Mounting pitch-row decides compatibility

The 39-40mm pitch-row spacing between the three mounting holes is the single specification that determines if this part fits your card. Measure the hole centres on your existing cooler before purchase; a mismatch means the fan cannot be secured. No other dimensions or adapter options are provided.

Přednosti

  • 12 V 0.38 A four-pin power for direct GPU cooling
  • Frameless design suits HD 7970 and HD 7950 cards
  • 39–40 mm mounting pitch fits reference board holes
  • Three mounting holes give secure frameless attachment
  • Brown and transparent two-tone finish matches OEM aesthetics

Specifikace

ModelT129025SU
Color2-Tone
TypeFan only
Bearing TypeSleeve Bearing
Power Connector4 Pin
LEDNo

Otázky k tomuto produktu

How do I mount the T129025SU fan onto a graphics card with 39 to 40 mm hole spacing?

Align the three mounting holes on the frameless cooler with the 39~40 mm pitch-row on cards such as the HD7970, HD7950 or GTX680 DirectCU II, then secure each hole with the correct screws before connecting the 4-pin power lead.

What maintenance does the sleeve-bearing fan require over time?

The sleeve bearing cannot be relubricated easily; when noise or vibration increases after extended use, replace the entire T129025SU unit rather than attempting a bearing service.

At what sustained load does the 0.38 A current limit become a constraint?

The fan draws 0.38 A at 12 V continuously; if the graphics card's fan header cannot supply that current steadily, the cooler will hit its electrical limit and may spin down or shut off.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.