OWC 128GB DDR4 2933 CL21 4Rx4 288-pin ECC Load Reduced DIMM
- 128GB
- 288-Pin DDR4 ECC LR…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
Single 128GB DDR4 3200 ECC registered DIMM for Fujitsu PRIMERGY servers
Capacity 128GB
This 128GB DDR4 3200 module is an ECC registered DIMM built for Fujitsu PRIMERGY CX400 M7, TX2550 M5, CX2570 M4, RX2530 M4 and RX2540 M4 systems. It targets administrators who need high-density registered memory for virtualization, database or compute workloads. The single-module design simplifies capacity scaling in qualified platforms.
Before ordering, confirm your system accepts 4Rx4 registered ECC DDR4 at 1.2V and that the memory controller supports the required rank-per-channel limit. This module cannot be mixed with unbuffered or load-reduced DIMMs, and standard desktop platforms will not recognise it. Check the vendor memory-qualified list for exact population rules.
The module operates at 1.2V without a heat spreader, relying on chassis airflow for thermal management. Under normal server loads it runs within JEDEC thermal limits and adds minimal acoustic contribution. Power draw scales with capacity and rank count, so ensure the power budget accounts for the full 128GB configuration.
| Brand | OWC |
|---|---|
| Part Number | 3R2D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Fujitsu PRIMERGY CX400 M7 Fujitsu PRIMERGY TX2550 M5 Fujitsu PRIMERGY CX2570 M4 Fujitsu PRIMERGY RX2530 M4 Fujitsu PRIMERGY RX2540 M4 |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The upgrade consists of one 128GB DDR4 3200 PC4-25600 CL22 4Rx4 288-pin 1.2V ECC Registered DIMM. No extra modules are included; the server can be populated with this single stick or combined with identical modules.
This module delivers 128GB per slot at DDR4 3200 with CL22 latency. Select it when the board supports 4Rx4 registered ECC and you need maximum density per DIMM; otherwise match the capacity and rank already installed.
PC4-25600 indicates a peak transfer rate of 25,600 MB/s at DDR4 3200. In the TX2550 M5 the module will run at that speed with CL22 timing, providing 128GB of registered ECC capacity per occupied slot.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?