OWC 128GB DDR4 2933 CL21 4Rx4 288-pin ECC Load Reduced DIMM
- 128GB
- 288-Pin DDR4 ECC LR…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
Single 128GB DDR4 3200 ECC registered DIMM for Fujitsu PRIMERGY servers
Capacity 128GB
This 128GB DDR4 3200 module is an ECC registered DIMM built for Fujitsu PRIMERGY CX400 M7, TX2550 M5, CX2570 M4, RX2530 M4 and RX2540 M4 systems. It targets administrators who need high-density registered memory for virtualization, database or compute workloads. The single-module design simplifies capacity scaling in qualified platforms.
Before ordering, confirm your system accepts 4Rx4 registered ECC DDR4 at 1.2V and that the memory controller supports the required rank-per-channel limit. This module cannot be mixed with unbuffered or load-reduced DIMMs, and standard desktop platforms will not recognise it. Check the vendor memory-qualified list for exact population rules.
The module operates at 1.2V without a heat spreader, relying on chassis airflow for thermal management. Under normal server loads it runs within JEDEC thermal limits and adds minimal acoustic contribution. Power draw scales with capacity and rank count, so ensure the power budget accounts for the full 128GB configuration.
| Brand | OWC |
|---|---|
| Part Number | 3R2D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Fujitsu PRIMERGY CX400 M7 Fujitsu PRIMERGY TX2550 M5 Fujitsu PRIMERGY CX2570 M4 Fujitsu PRIMERGY RX2530 M4 Fujitsu PRIMERGY RX2540 M4 |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The upgrade consists of one 128GB DDR4 3200 PC4-25600 CL22 4Rx4 288-pin 1.2V ECC Registered DIMM. No extra modules are included; the server can be populated with this single stick or combined with identical modules.
This module delivers 128GB per slot at DDR4 3200 with CL22 latency. Select it when the board supports 4Rx4 registered ECC and you need maximum density per DIMM; otherwise match the capacity and rank already installed.
PC4-25600 indicates a peak transfer rate of 25,600 MB/s at DDR4 3200. In the TX2550 M5 the module will run at that speed with CL22 timing, providing 128GB of registered ECC capacity per occupied slot.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม