Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR4 ECC SODIMM sticks, 260-pin, no heat spreader

OWC

OWC 16GB (2x8GB) DDR4 2666 ECC SODIMM 1Rx8 1.2V memory upgrade

SKU CH-T386-W417S

16 GB DDR4-2666 ECC SODIMM kit validated for Synology DS2419+ and DS2419+II NAS systems

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 ECC SODIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit (2 × 8 GB) expands NAS capacity for heavier workloads
  • DDR4 2666 MHz CL19 delivers fast data rates for responsive multitasking
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw and heat in dense enclosures
  • Validated for Synology DS2419+ and DS2419+II for guaranteed compatibility

Synology DS2419+ memory kit

This OWC kit provides 16 GB of DDR4 ECC SODIMM memory in a matched pair of 8 GB modules. It is built for the Synology DiskStation DS2419+ and DS2419+II NAS systems. The modules run at 2666 MHz with CL19 latency and operate at the standard 1.2 V. ECC support helps protect data integrity in always-on storage appliances.

NAS owners needing ECC SODIMMs

The 260-pin unbuffered design fits the target Synology models and is backward compatible with 2400 MHz and 2133 MHz slots. Builders using desktop DIMM slots, non-ECC platforms or registered memory requirements cannot use these modules. The kit is also unsuitable for systems limited to single-rank 2Rx8 configurations.

Sustained NAS workloads

Under continuous file-serving or backup tasks the ECC circuitry corrects single-bit errors without halting the system. Unbuffered operation keeps latency low during steady metadata and parity calculations. JEDEC-standard voltage and timings maintain stability across long uptime periods without thermal throttling.

Priekšrocības

  • 16 GB kit (2 × 8 GB) expands NAS capacity for heavier workloads
  • DDR4 2666 MHz CL19 delivers fast data rates for responsive multitasking
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw and heat in dense enclosures
  • Validated for Synology DS2419+ and DS2419+II for guaranteed compatibility

Specifikācijas

BrandOWC
Part Number2C6D41R8016P
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 ECC SODIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology DiskStationDS2419+
Synology DiskStationDS2419+II

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the Synology DiskStation DS2419+ need both SODIMM slots filled for this 16 GB kit to work?

The kit contains two 8 GB modules; the DS2419+ has two DDR4 SODIMM slots, so both must be populated to reach 16 GB.

Will these 2666 MHz modules run at full speed if my DS2419+II currently has 2133 MHz memory installed?

The modules are backward compatible with 2133 MHz and 2400 MHz, so they will operate at the speed of the slowest installed memory.

How can I confirm the ECC function is active after installing the kit in my DS2419+?

Check the DSM Resource Monitor or system log; it will report ECC memory detected and show corrected error counts if any occur.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.