Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR4 ECC SODIMM sticks, 260-pin, no heat spreader

OWC

OWC 16GB (2x8GB) DDR4 2666 ECC SODIMM 1Rx8 1.2V memory upgrade

SKU CH-T386-W417S

16 GB DDR4-2666 ECC SODIMM kit validated for Synology DS2419+ and DS2419+II NAS systems

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 ECC SODIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB kit (2 × 8 GB) expands NAS capacity for heavier workloads
  • DDR4 2666 MHz CL19 delivers fast data rates for responsive multitasking
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw and heat in dense enclosures
  • Validated for Synology DS2419+ and DS2419+II for guaranteed compatibility

Synology DS2419+ memory kit

This OWC kit provides 16 GB of DDR4 ECC SODIMM memory in a matched pair of 8 GB modules. It is built for the Synology DiskStation DS2419+ and DS2419+II NAS systems. The modules run at 2666 MHz with CL19 latency and operate at the standard 1.2 V. ECC support helps protect data integrity in always-on storage appliances.

NAS owners needing ECC SODIMMs

The 260-pin unbuffered design fits the target Synology models and is backward compatible with 2400 MHz and 2133 MHz slots. Builders using desktop DIMM slots, non-ECC platforms or registered memory requirements cannot use these modules. The kit is also unsuitable for systems limited to single-rank 2Rx8 configurations.

Sustained NAS workloads

Under continuous file-serving or backup tasks the ECC circuitry corrects single-bit errors without halting the system. Unbuffered operation keeps latency low during steady metadata and parity calculations. JEDEC-standard voltage and timings maintain stability across long uptime periods without thermal throttling.

Přednosti

  • 16 GB kit (2 × 8 GB) expands NAS capacity for heavier workloads
  • DDR4 2666 MHz CL19 delivers fast data rates for responsive multitasking
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw and heat in dense enclosures
  • Validated for Synology DS2419+ and DS2419+II for guaranteed compatibility

Specifikace

BrandOWC
Part Number2C6D41R8016P
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 ECC SODIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology DiskStationDS2419+
Synology DiskStationDS2419+II

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the Synology DiskStation DS2419+ need both SODIMM slots filled for this 16 GB kit to work?

The kit contains two 8 GB modules; the DS2419+ has two DDR4 SODIMM slots, so both must be populated to reach 16 GB.

Will these 2666 MHz modules run at full speed if my DS2419+II currently has 2133 MHz memory installed?

The modules are backward compatible with 2133 MHz and 2400 MHz, so they will operate at the speed of the slowest installed memory.

How can I confirm the ECC function is active after installing the kit in my DS2419+?

Check the DSM Resource Monitor or system log; it will report ECC memory detected and show corrected error counts if any occur.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.