NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
32 GB DDR4 2400 MHz ECC registered RDIMM for servers, workstations and NAS, CL17 1.2 V
This 32 GB DDR4 2400 MHz ECC registered RDIMM targets administrators upgrading servers, workstations or NAS systems that require registered memory with error correction. The module matches Kingston part numbers KTH-PL424/32G and KTD-PE424/32G for direct replacement. It will not work in standard desktop computers and cannot be mixed with unbuffered modules.
Operating at 1.2 V with CL17 latency, the dual-rank 2Rx4 design maintains data integrity through ECC correction during continuous workloads. JEDEC compliance and 100 % factory testing ensure stable operation across extended uptime periods typical of server environments.
Verify that your platform supports 288-pin DDR4 registered DIMMs and accepts 32 GB per slot before ordering. Confirm the system requires ECC registered memory rather than unbuffered or load-reduced types. Ensure the memory controller can address the full module capacity without population limits.
| Brand | OWC |
|---|---|
| Part Number | 2R4D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Operating at 1.2V, this DDR4 2400MHz ECC registered module draws less power per stick than higher-voltage server memory, reducing heat output during all-day workloads.
The module needs a 288-pin DDR4 slot with ECC and registered-buffer support; it will not work in standard desktop boards that only accept unbuffered non-ECC DIMMs.
Yes, the module follows JEDEC DDR4 standards and will run at the lowest common speed and timing when mixed with slower ECC registered DIMMs in the same system.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?