NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR4 2400 MHz ECC registered RDIMM for servers, workstations and NAS, CL17 1.2 V
This 32 GB DDR4 2400 MHz ECC registered RDIMM targets administrators upgrading servers, workstations or NAS systems that require registered memory with error correction. The module matches Kingston part numbers KTH-PL424/32G and KTD-PE424/32G for direct replacement. It will not work in standard desktop computers and cannot be mixed with unbuffered modules.
Operating at 1.2 V with CL17 latency, the dual-rank 2Rx4 design maintains data integrity through ECC correction during continuous workloads. JEDEC compliance and 100 % factory testing ensure stable operation across extended uptime periods typical of server environments.
Verify that your platform supports 288-pin DDR4 registered DIMMs and accepts 32 GB per slot before ordering. Confirm the system requires ECC registered memory rather than unbuffered or load-reduced types. Ensure the memory controller can address the full module capacity without population limits.
| Brand | OWC |
|---|---|
| Part Number | 2R4D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Operating at 1.2V, this DDR4 2400MHz ECC registered module draws less power per stick than higher-voltage server memory, reducing heat output during all-day workloads.
The module needs a 288-pin DDR4 slot with ECC and registered-buffer support; it will not work in standard desktop boards that only accept unbuffered non-ECC DIMMs.
Yes, the module follows JEDEC DDR4 standards and will run at the lowest common speed and timing when mixed with slower ECC registered DIMMs in the same system.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?